[Thu Jul 19 19:46:55 2012] Detection parameters:
  Position = (320.4, 344.3) = 16 54 5.75 -41 47 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.0 +/- 25.0
  Background counts = 42.9
  Rate = 0.009 +/- 0.0009

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 3.68'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.27"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 20 06:25:15 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 20 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:17 2012] Warning, spatial fit 15 centroid is now closest to src. 23
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:17 2012] Source is confused with source 3
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.27"
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jul 20 18:23:46 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src15 appears to have run properly
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jul 20 18:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:39 2012] Source 22 is offset by -5.448785 and -2.425547 pixels which is larger than
2 X fitted extent = 2.483356 x 1.831044, not incorporating fit results
[Fri Jul 20 18:24:39 2012] Spatial fit model total counts = 818.603000, observed total counts = 757.000000
[Fri Jul 20 18:24:39 2012] Offset between fit and detection position for source 22 = 4.832930 pixels
[Fri Jul 20 18:24:39 2012] Warning, changing simple spatial fit ID from 15 to 57
[Fri Jul 20 18:24:39 2012] 793.001000 total counts/ 597.837000 bgd. counts: snr = 7.981937
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.832930 pixels
  Position = (324.8, 346.2) = 16 54 4.02 -41 47 32.2
  Extent = 17.0" x 17.0", rotation angle = 0
  Source counts = 195.2 +/- 28.2
  Background counts = 597.8
  Rate = 0.006 +/- 0.0009
[Fri Jul 20 18:24:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:39 2012] Assessing source extent using major
[Fri Jul 20 18:24:39 2012] Source does appear to be extended
[Fri Jul 20 18:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:16 2012] XMMSAS src. selection expression = ellipse(28212.398000, 30067.602000, 1022.844029, 1022.844029, 0.000000, X, Y)
[Sat Jul 21 00:38:16 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22_src.reg
[Sat Jul 21 00:38:16 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (266, 287) - (384, 405)
[Sat Jul 21 00:38:16 2012] XMMSAS bgd. selection expression = annulus(28212.398000, 30067.602000, 1704.740049, 3409.480098, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28685.805301, 29044.587267, 434.342033, 395.309178, 19.467355, X, Y) && !ellipse(28308.577054, 30115.231876, 463.762315, 370.347723, 352.326056, X, Y) && !ellipse(29394.521464, 31038.430682, 543.709868, 319.974340, -0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(26145.918000, 26467.446000, 222.751206, 222.751206, 0.000000, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(29670.705841, 31510.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.859955, 29946.364258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30953.877400, 29052.907400, 349.868010, 349.868010, 0.000000, X, Y) && !ellipse(30989.967000, 26439.630400, 313.335209, 313.335209, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(25694.162000, 25726.471600, 1073.024031, 1073.024031, 0.000000, X, Y) && !ellipse(28799.372000, 27247.474400, 310.768797, 310.768797, 0.000000, X, Y) && !ellipse(27736.822400, 32343.842200, 761.459222, 374.440811, 90.000000, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27292.412903, 31365.068542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.732605, 29040.770935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.433350, 33831.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.143890, 33769.080750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.813782, 30664.621368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y) && !ellipse(29862.714905, 28739.990631, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 00:38:16 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22.gif
[Sat Jul 21 00:44:03 2012] Mean detx,y = (-1659.06, 2093.03) 
[Sat Jul 21 00:44:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:44:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:44:17 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 21 00:44:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:19 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00622, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src22.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 8e-14
[Sat Jul 21 02:39:59 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Sat Jul 21 02:39:59 2012] Flag c found in src. 22 procflags, skipping spectral fitting