[Thu Jul 19 19:46:54 2012] Detection parameters:
  Position = (309.3, 319.0) = 16 54 10.04 -41 49 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4024.1 +/- 76.4
  Background counts = 48.4
  Rate = 0.1 +/- 0.003

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 1.69'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 20 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:17 2012] Warning, spatial fit 1 centroid is now closest to src. 58
[Fri Jul 20 06:26:17 2012] Source 1 is offset by 2.869756 and 0.425838 pixels which is larger than
2 X fitted extent = 2.270372 x 2.270372, not incorporating fit results
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 1533.110000, observed total counts = 3849.000000
[Fri Jul 20 06:26:17 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 18:23:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 20 18:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:39 2012] Warning, spatial fit 1 centroid is now closest to src. 58
[Fri Jul 20 18:24:39 2012] Source 1 is offset by 2.869756 and 0.451355 pixels which is larger than
2 X fitted extent = 2.206998 x 2.206998, not incorporating fit results
[Fri Jul 20 18:24:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:39 2012] Assessing source extent using major
[Fri Jul 20 18:24:39 2012] Source does appear to be extended
[Fri Jul 20 18:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:16 2012] Counts = 4024.061035, rescaling region sizes by 2.000000
[Sat Jul 21 00:38:16 2012] XMMSAS src. selection expression = ellipse(26864.294739, 27702.553864, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 21 00:38:16 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 21 00:38:16 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (234, 244) - (384, 394)
[Sat Jul 21 00:38:16 2012] XMMSAS bgd. selection expression = annulus(26864.294739, 27702.553864, 4350.000000, 8700.000000, X, Y) && !ellipse(28685.805301, 29044.587267, 434.342033, 395.309178, 19.467355, X, Y) && !ellipse(28308.577054, 30115.231876, 463.762315, 370.347723, 352.326056, X, Y) && !ellipse(29394.521464, 31038.430682, 543.709868, 319.974340, -0.000000, X, Y) && !ellipse(26496.772200, 25943.070000, 381.945611, 381.945611, 0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(28669.996094, 34871.948059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23284.509200, 27205.319600, 306.522409, 306.522409, 0.000000, X, Y) && !ellipse(23150.702400, 27698.622800, 285.984808, 285.984808, 0.000000, X, Y) && !ellipse(29092.105474, 35660.111521, 626.198418, 389.759700, 6.368407, X, Y) && !ellipse(25815.648200, 24431.460000, 446.508813, 297.104009, 345.329800, X, Y) && !ellipse(34824.967600, 33830.736400, 460.343213, 460.343213, 0.000000, X, Y) && !ellipse(21943.427340, 29137.315600, 291.118408, 291.118408, 0.000000, X, Y) && !ellipse(28212.398000, 30067.602000, 1363.792039, 1363.792039, 0.000000, X, Y) && !ellipse(26145.918000, 26467.446000, 222.751206, 222.751206, 0.000000, X, Y) && !ellipse(30067.987420, 23663.459600, 307.596009, 307.596009, 0.000000, X, Y) && !ellipse(21286.880600, 31451.083000, 389.763211, 389.763211, 0.000000, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(27610.177429, 25787.189178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.576000, 19309.930000, 404.577612, 404.577612, 0.000000, X, Y) && !ellipse(19646.143585, 27712.746521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23222.571594, 34249.914520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.705841, 31510.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32055.016940, 28164.713600, 316.785609, 316.785609, 0.000000, X, Y) && !ellipse(19623.477600, 27080.013214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.859955, 29946.364258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30953.877400, 29052.907400, 349.868010, 349.868010, 0.000000, X, Y) && !ellipse(30989.967000, 26439.630400, 313.335209, 313.335209, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(27165.995000, 24911.921400, 305.391209, 305.391209, 0.000000, X, Y) && !ellipse(25694.162000, 25726.471600, 1073.024031, 1073.024031, 0.000000, X, Y) && !ellipse(28799.372000, 27247.474400, 310.768797, 310.768797, 0.000000, X, Y) && !ellipse(22632.127600, 26101.727600, 475.074414, 294.395208, 336.063783, X, Y) && !ellipse(22431.613400, 36164.656600, 716.633621, 716.633621, 0.000000, X, Y) && !ellipse(22425.226471, 19801.357925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27736.822400, 32343.842200, 761.459222, 374.440811, 90.000000, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.158000, 23771.035420, 261.982408, 151.478404, 89.977059, X, Y) && !ellipse(25268.758000, 25405.856000, 1043.488030, 1043.488030, 0.000000, X, Y) && !ellipse(27292.412903, 31365.068542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21066.255035, 22709.941193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23142.211823, 28300.883301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30331.176239, 24387.858643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.732605, 29040.770935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.433350, 33831.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.143890, 33769.080750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.813782, 30664.621368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.355600, 29441.293000, 640.779218, 640.779218, 0.000000, X, Y) && !ellipse(20177.624695, 22725.935089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.336884, 21667.951050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.181800, 23358.711000, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(26301.598450, 25374.685242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.255096, 24264.436951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y) && !ellipse(29862.714905, 28739.990631, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 00:38:16 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1.gif
[Sat Jul 21 00:38:22 2012] Mean detx,y = (123.93, -29.61) 
[Sat Jul 21 00:38:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:40:44 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:40:44 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 00:40:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 21 00:58:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 00:58:21 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:19 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.132, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 1.5e-12
[Sat Jul 21 02:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul 21 02:42:32 2012] xmm0109490401/analysis//spectral/fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete