[Thu Jul 19 19:46:15 2012] Detection parameters: Position = (306.7, 276.8) = 16 54 11.05 -41 52 34.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 72.6 +/- 13.7 Background counts = 37.1 Rate = 0.003 +/- 0.0005 [Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 1.68' [Thu Jul 19 23:51:11 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting [Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 7.27" [Thu Jul 19 23:51:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849 [Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 7.27" [Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60.ximg exists [Fri Jul 20 03:17:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60.csv [Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60_1.ximg exists [Fri Jul 20 03:17:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60.csv [Fri Jul 20 03:17:20 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly [Fri Jul 20 06:26:02 2012] Spatial fit model total counts = 495.632000, observed total counts = 495.000000 [Fri Jul 20 06:26:02 2012] Offset between fit and detection position for source 75 = 0.988878 pixels [Fri Jul 20 06:26:02 2012] Warning, changing simple spatial fit ID from 60 to 51 [Fri Jul 20 06:26:02 2012] 497.766200 total counts/ 485.680000 bgd. counts: snr = 0.548422 Spatial fit parameters: Offset between fit and detection position for source 75 = 0.988878 pixels Position = (305.8, 276.5) = 16 54 11.42 -41 52 35.2 Extent = 4.7 (1.9-14.9)", rotation angle = 0 Source counts = 12.1 +/- 22.3 Background counts = 485.7 Rate = 0.0004 +/- 0.0007 Deleting source due to low Poisson probability