[Thu Jul 19 19:46:15 2012] Detection parameters:
  Position = (302.7, 291.4) = 16 54 12.61 -41 51 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.0 +/- 13.4
  Background counts = 41.3
  Rate = 0.002 +/- 0.0005

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 0.60'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 6.73"
[Thu Jul 19 23:51:11 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.955
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 6.73"
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78.ximg exists
[Fri Jul 20 03:17:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78.csv
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri Jul 20 03:17:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78.csv
[Fri Jul 20 03:17:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Fri Jul 20 06:26:02 2012] Warning, spatial fit 78 centroid is now closest to src. 5
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:02 2012] Source is confused with source 5
[Fri Jul 20 11:42:07 2012] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 6.73"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.955
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 6.73"
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70.csv
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70.csv
[Fri Jul 20 15:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:56 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Jul 20 15:21:56 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Jul 20 15:21:56 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Fri Jul 20 18:24:26 2012] Spatial fit model total counts = 1178.280000, observed total counts = 1170.000000
[Fri Jul 20 18:24:26 2012] Offset between fit and detection position for source 70 = 7.875807 pixels
[Fri Jul 20 18:24:26 2012] 1290.635000 total counts/ 839.939000 bgd. counts: snr = 15.551054
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 7.875807 pixels
  Position = (296.8, 286.3) = 16 54 14.92 -41 51 52.8
  Extent = 13.5 (13.3-26.9)", rotation angle = 0
  Source counts = 450.7 +/- 35.9
  Background counts = 839.9
  Rate = 0.01 +/- 0.001
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:17 2012] XMMSAS src. selection expression = ellipse(25774.880000, 24855.662000, 807.144023, 807.144023, 0.000000, X, Y)
[Fri Jul 20 23:00:17 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70_src.reg
[Fri Jul 20 23:00:17 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (250, 240) - (343, 333)
[Fri Jul 20 23:00:17 2012] XMMSAS bgd. selection expression = annulus(25774.880000, 24855.662000, 1345.240039, 2690.480077, X, Y) && !ellipse(26849.096740, 27703.129600, 420.927212, 420.927212, 0.000000, X, Y) && !ellipse(25719.139692, 26581.256787, 580.067217, 329.292319, 138.017929, X, Y) && !ellipse(26502.100460, 25959.592600, 370.636011, 370.636011, 0.000000, X, Y) && !ellipse(24667.335400, 26925.381400, 424.457612, 382.028011, 2.488500, X, Y) && !ellipse(23281.883000, 27191.783400, 298.895209, 298.895209, 0.000000, X, Y) && !ellipse(23183.805511, 27681.698608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25842.306000, 24445.417200, 286.746408, 286.746408, 0.000000, X, Y) && !ellipse(26140.668000, 26486.122000, 268.366408, 268.366408, 0.000000, X, Y) && !ellipse(27611.088000, 25775.563320, 381.042411, 381.042411, 0.000000, X, Y) && !ellipse(26566.315491, 27020.906952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.852600, 24907.288400, 406.938412, 406.938412, 0.000000, X, Y) && !ellipse(27591.487010, 23699.200019, 903.017289, 341.976633, 323.669588, X, Y) && !ellipse(26121.021942, 27532.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.133600, 25866.441380, 371.944011, 371.944011, 0.000000, X, Y) && !ellipse(23422.959580, 21851.505200, 530.809615, 530.809615, 0.000000, X, Y) && !ellipse(25662.744000, 25725.724400, 1073.464031, 1073.464031, 0.000000, X, Y) && !ellipse(24043.622460, 21428.194000, 1327.096038, 198.772806, 90.009000, X, Y) && !ellipse(22637.081600, 26196.838800, 604.710417, 604.710417, 0.000000, X, Y) && !ellipse(27556.726379, 27120.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.431335, 27522.638458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.237500, 27298.902200, 507.452815, 507.452815, 0.000000, X, Y)
[Fri Jul 20 23:00:17 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70.gif
[Fri Jul 20 23:17:14 2012] Mean detx,y = (-2478.17, -1599.67) 
[Fri Jul 20 23:17:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:17:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:17:27 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Fri Jul 20 23:17:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jul 21 02:37:18 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:18 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jul 21 02:37:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:19 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src70.arf
[Sat Jul 21 02:37:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:19 2012] Updating source flux to 1.8e-13
[Sat Jul 21 02:37:24 2012] Flag c found in src. 70 procflags, skipping spectral fitting