[Thu Jul 19 19:46:15 2012] Detection parameters:
  Position = (260.5, 301.6) = 16 54 29.05 -41 50 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 12.3
  Background counts = 33.2
  Rate = 0.002 +/- 0.0005

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 2.76'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Thu Jul 19 23:51:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.187
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 7.81"
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65.ximg exists
[Fri Jul 20 03:17:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65.csv
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri Jul 20 03:17:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65.csv
[Fri Jul 20 03:17:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Jul 20 06:26:02 2012] Spatial fit model total counts = 312.000000, observed total counts = 312.000000
[Fri Jul 20 06:26:02 2012] Offset between fit and detection position for source 65 = 0.255170 pixels
[Fri Jul 20 06:26:02 2012] 311.068700 total counts/ 241.582000 bgd. counts: snr = 4.470637
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.255170 pixels
  Position = (260.8, 301.7) = 16 54 28.96 -41 50 45.7
  Extent = 7.6 (5.2-10.4)", rotation angle = 0
  Source counts = 69.5 +/- 17.6
  Background counts = 241.6
  Rate = 0.002 +/- 0.0006
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.999
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 7.56"
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57.csv
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57.csv
[Fri Jul 20 15:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:56 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri Jul 20 15:21:56 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri Jul 20 15:21:56 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Fri Jul 20 18:24:26 2012] Warning, spatial fit 57 centroid is now closest to src. 20
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(22637.081600, 26196.838800, 453.532813, 453.532813, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (235, 276) - (287, 328)
[Fri Jul 20 23:00:17 2012] XMMSAS bgd. selection expression = annulus(22637.081600, 26196.838800, 755.888022, 1511.776044, X, Y) && !ellipse(23281.883000, 27191.783400, 298.895209, 298.895209, 0.000000, X, Y) && !ellipse(23183.805511, 27681.698608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.133600, 25866.441380, 371.944011, 371.944011, 0.000000, X, Y) && !ellipse(24491.266724, 28557.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.431335, 27522.638458, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 23:00:17 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65.gif
[Fri Jul 20 23:14:22 2012] Mean detx,y = (-692.10, -4575.87) 
[Fri Jul 20 23:14:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:14:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:14:32 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jul 20 23:14:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Jul 21 00:30:52 2012] Not generating rmf since there are only 69 counts
[Sat Jul 21 00:30:52 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:18 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:18 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Jul 21 02:37:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:19 2012] Using photon index=1.80, rate=0.00222, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src65.arf
[Sat Jul 21 02:37:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:19 2012] Updating source flux to 3.3e-14
[Sat Jul 21 02:37:24 2012] Source 65 has fewer than 100.000000 counts, skipping spectral fitting