[Thu Jul 19 19:46:15 2012] Detection parameters:
  Position = (305.9, 311.1) = 16 54 11.38 -41 50 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 19.2
  Background counts = 45.1
  Rate = 0.005 +/- 0.0006

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 1.07'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Thu Jul 19 23:51:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 6.96"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33.csv
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33.csv
[Fri Jul 20 03:17:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Jul 20 06:26:02 2012] Source 63 is offset by -3.286627 and -7.260196 pixels which is larger than
2 X fitted extent = 2.065517 x 2.065517, not incorporating fit results
[Fri Jul 20 06:26:02 2012] Source 63 is offset by -4.391109 and -7.787989 pixels which is larger than
2 X fitted extent = 2.134253 x 2.134253, not incorporating fit results
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 6.96"
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32.csv
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32.csv
[Fri Jul 20 15:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jul 20 15:21:55 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Jul 20 18:24:26 2012] Source 63 is offset by -3.280925 and -7.260196 pixels which is larger than
2 X fitted extent = 2.080947 x 2.080947, not incorporating fit results
[Fri Jul 20 18:24:26 2012] Source 63 is offset by -4.391109 and -8.548863 pixels which is larger than
2 X fitted extent = 6.516736 x 1.923292, not incorporating fit results
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(26566.315491, 27020.906952, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (268, 274) - (343, 349)
[Fri Jul 20 23:00:16 2012] XMMSAS bgd. selection expression = annulus(26566.315491, 27020.906952, 1087.500000, 2175.000000, X, Y) && !ellipse(26849.096740, 27703.129600, 420.927212, 420.927212, 0.000000, X, Y) && !ellipse(28690.521600, 29045.433000, 432.492812, 432.492812, 0.000000, X, Y) && !ellipse(25719.139692, 26581.256787, 580.067217, 329.292319, 138.017929, X, Y) && !ellipse(26502.100460, 25959.592600, 370.636011, 370.636011, 0.000000, X, Y) && !ellipse(24667.335400, 26925.381400, 424.457612, 382.028011, 2.488500, X, Y) && !ellipse(26140.668000, 26486.122000, 268.366408, 268.366408, 0.000000, X, Y) && !ellipse(24719.118000, 28078.550000, 263.380808, 263.380808, 0.000000, X, Y) && !ellipse(27827.242004, 29812.728668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.088000, 25775.563320, 381.042411, 381.042411, 0.000000, X, Y) && !ellipse(29123.886627, 29938.574402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.852600, 24907.288400, 406.938412, 406.938412, 0.000000, X, Y) && !ellipse(24220.354400, 29440.837920, 467.205613, 467.205613, 0.000000, X, Y) && !ellipse(26121.021942, 27532.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.133600, 25866.441380, 371.944011, 371.944011, 0.000000, X, Y) && !ellipse(24491.266724, 28557.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27801.344849, 29033.727142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25662.744000, 25725.724400, 1073.464031, 1073.464031, 0.000000, X, Y) && !ellipse(27556.726379, 27120.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.431335, 27522.638458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.237500, 27298.902200, 507.452815, 507.452815, 0.000000, X, Y) && !ellipse(25774.880000, 24855.662000, 1076.192031, 1076.192031, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63.gif
[Fri Jul 20 23:08:09 2012] Mean detx,y = (-238.58, -592.15) 
[Fri Jul 20 23:08:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:08:21 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:08:21 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jul 20 23:08:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jul 21 00:19:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 00:19:30 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:17 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:17 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jul 21 02:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:18 2012] Using photon index=1.80, rate=0.00458, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src63.arf
[Sat Jul 21 02:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:18 2012] Updating source flux to 5.4e-14
[Sat Jul 21 02:37:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting