[Thu Jul 19 19:46:15 2012] Detection parameters:
  Position = (320.0, 388.9) = 16 54 5.92 -41 44 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.1 +/- 12.1
  Background counts = 27.3
  Rate = 0.003 +/- 0.0005

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 6.74'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Thu Jul 19 23:51:11 2012] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.023
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.80"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src48.ximg exists
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Jul 20 03:17:19 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src48 appears to have run properly
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri Jul 20 06:26:02 2012] Spatial fit model total counts = 325.454000, observed total counts = 300.000000
[Fri Jul 20 06:26:02 2012] Offset between fit and detection position for source 43 = 0.407974 pixels
[Fri Jul 20 06:26:02 2012] 319.868500 total counts/ 265.964000 bgd. counts: snr = 3.305321
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.407974 pixels
  Position = (319.8, 389.2) = 16 54 6.00 -41 44 24.8
  Extent = 4.3 (3.4-5.8)", rotation angle = 0
  Source counts = 53.9 +/- 17.9
  Background counts = 266.0
  Rate = 0.002 +/- 0.0006
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 4.31"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.013
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 4.31"
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45.csv
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45.csv
[Fri Jul 20 15:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:26 2012] Warning, spatial fit 45 centroid is now closest to src. 38
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(27771.986540, 33815.633000, 258.476407, 258.476407, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (305, 374) - (335, 404)
[Fri Jul 20 23:00:16 2012] XMMSAS bgd. selection expression = annulus(27771.986540, 33815.633000, 430.794012, 861.588025, X, Y) && !ellipse(28690.770600, 34809.012800, 673.288019, 437.200013, 348.179000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43.gif
[Fri Jul 20 23:10:45 2012] Mean detx,y = (6173.94, 1464.79) 
[Fri Jul 20 23:10:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:11:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:11:03 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jul 20 23:11:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jul 21 00:23:57 2012] Not generating rmf since there are only 53 counts
[Sat Jul 21 00:23:57 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:18 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:18 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 21 02:37:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:19 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src43.arf
[Sat Jul 21 02:37:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:19 2012] Updating source flux to 3.5e-14
[Sat Jul 21 02:37:24 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting