[Thu Jul 19 19:46:15 2012] Detection parameters:
  Position = (390.9, 426.8) = 16 53 38.37 -41 41 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 12.4
  Background counts = 17.6
  Rate = 0.004 +/- 0.0007

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 11.47'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Thu Jul 19 23:51:11 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.828
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.16"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42.csv
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42.csv
[Fri Jul 20 03:17:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Jul 20 06:26:02 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 11.765672 pixels away
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:02 2012] Source is confused with source 9
[Fri Jul 20 11:42:07 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Jul 20 11:42:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.828
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 12.16"
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40.csv
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Jul 20 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40.csv
[Fri Jul 20 15:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jul 20 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:26 2012] Warning, spatial fit 40 centroid is now closest to src. 9
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(33962.021729, 37083.351166, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (353, 389) - (428, 464)
[Fri Jul 20 23:00:16 2012] XMMSAS bgd. selection expression = annulus(33962.021729, 37083.351166, 1087.500000, 2175.000000, X, Y) && !ellipse(34429.904266, 36830.969391, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36.gif
[Fri Jul 20 23:09:34 2012] Mean detx,y = (8527.66, 8149.92) 
[Fri Jul 20 23:09:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:09:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:09:49 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jul 20 23:09:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jul 21 00:23:28 2012] Not generating rmf since there are only 64 counts
[Sat Jul 21 00:23:28 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:18 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:18 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jul 21 02:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:18 2012] Using photon index=1.80, rate=0.00381, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src36.arf
[Sat Jul 21 02:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:18 2012] Updating source flux to 7.8e-14
[Sat Jul 21 02:37:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting