[Thu Jul 19 19:46:14 2012] Detection parameters:
  Position = (275.2, 308.2) = 16 54 23.32 -41 50 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.9 +/- 20.5
  Background counts = 37.8
  Rate = 0.007 +/- 0.0007

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 1.82'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Jul 19 23:51:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.34"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24.csv
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24.csv
[Fri Jul 20 03:17:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Jul 20 03:17:21 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Jul 20 06:26:01 2012] Spatial fit model total counts = 1085.620000, observed total counts = 1088.000000
[Fri Jul 20 06:26:01 2012] Offset between fit and detection position for source 25 = 1.458062 pixels
[Fri Jul 20 06:26:01 2012] Warning, changing simple spatial fit ID from 24 to 8
[Fri Jul 20 06:26:01 2012] 1145.087500 total counts/ 1093.020000 bgd. counts: snr = 1.574899
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.458062 pixels
  Position = (273.8, 307.8) = 16 54 23.87 -41 50 19.0
  Extent = 5.2 (2.4-6.9)", rotation angle = 0
  Source counts = 52.1 +/- 33.8
  Background counts = 1093.0
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability