[Thu Jul 19 19:46:14 2012] Detection parameters:
  Position = (226.1, 312.3) = 16 54 42.44 -41 49 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.0 +/- 15.4
  Background counts = 22.8
  Rate = 0.007 +/- 0.0008

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 5.34'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Thu Jul 19 23:51:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.931
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.10"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25.csv
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25.csv
[Fri Jul 20 03:17:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jul 20 03:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jul 20 03:17:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jul 20 03:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:02 2012] Warning, spatial fit 25 centroid is now closest to src. 21
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Fri Jul 20 11:42:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.931
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 9.10"
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src24.ximg exists
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Jul 20 15:21:53 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src24 appears to have run properly
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Jul 20 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:26 2012] Spatial fit model total counts = 403.396000, observed total counts = 386.000000
[Fri Jul 20 18:24:26 2012] Offset between fit and detection position for source 23 = 0.208945 pixels
[Fri Jul 20 18:24:26 2012] 444.989800 total counts/ 372.877000 bgd. counts: snr = 3.734475
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.208945 pixels
  Position = (226.3, 312.1) = 16 54 42.38 -41 50 0.0
  Extent = 3.7" x 3.3", rotation angle = 17
  Source counts = 72.1 +/- 21.1
  Background counts = 372.9
  Rate = 0.002 +/- 0.0007
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(19636.833177, 27106.747889, 223.232065, 200.906277, 16.621873, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (213, 299) - (239, 325)
[Fri Jul 20 23:00:16 2012] XMMSAS bgd. selection expression = annulus(19636.833177, 27106.747889, 372.053442, 744.106885, X, Y) && !ellipse(19751.191800, 27778.368400, 405.564012, 405.564012, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23.gif
[Fri Jul 20 23:06:07 2012] Mean detx,y = (575.76, -7456.25) 
[Fri Jul 20 23:06:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:06:24 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:06:24 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 20 23:06:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jul 21 00:15:24 2012] Not generating rmf since there are only 72 counts
[Sat Jul 21 00:15:24 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:17 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:17 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jul 21 02:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:18 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src23.arf
[Sat Jul 21 02:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:18 2012] Updating source flux to 5.7e-14
[Sat Jul 21 02:37:24 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting