[Thu Jul 19 19:46:14 2012] Detection parameters:
  Position = (226.8, 319.8) = 16 54 42.18 -41 49 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 14.7
  Background counts = 22.5
  Rate = 0.006 +/- 0.0008

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 5.42'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Thu Jul 19 23:51:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.14"
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jul 20 03:17:19 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src27 appears to have run properly
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jul 20 03:17:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jul 20 03:17:21 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jul 20 03:17:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jul 20 03:17:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:02 2012] Source 21 is offset by -5.995965 and 0.034080 pixels which is larger than
2 X fitted extent = 0.843770 x 0.843770, not incorporating fit results
[Fri Jul 20 06:26:02 2012] Spatial fit model total counts = 317.629000, observed total counts = 327.000000
[Fri Jul 20 06:26:02 2012] Offset between fit and detection position for source 21 = 0.831000 pixels
[Fri Jul 20 06:26:02 2012] 299.746400 total counts/ 223.082000 bgd. counts: snr = 5.132884
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.831000 pixels
  Position = (227.6, 319.8) = 16 54 41.86 -41 49 26.5
  Extent = 5.1" x 5.1", rotation angle = 0
  Source counts = 76.7 +/- 17.3
  Background counts = 223.1
  Rate = 0.002 +/- 0.0006
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.082
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 5.07"
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26.csv
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26.csv
[Fri Jul 20 15:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul 20 15:21:55 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jul 20 15:21:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul 20 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:26 2012] Source 21 is offset by 0.157333 and -1.712168 pixels which is larger than
2 X fitted extent = 0.583030 x 0.583030, not incorporating fit results
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:16 2012] XMMSAS src. selection expression = ellipse(19751.191800, 27778.368400, 304.173009, 304.173009, 0.000000, X, Y)
[Fri Jul 20 23:00:16 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21_src.reg
[Fri Jul 20 23:00:16 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (210, 302) - (245, 337)
[Fri Jul 20 23:00:16 2012] XMMSAS bgd. selection expression = annulus(19751.191800, 27778.368400, 506.955015, 1013.910029, X, Y) && !ellipse(19636.833177, 27106.747889, 297.642754, 267.875037, 16.621873, X, Y)
[Fri Jul 20 23:00:16 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21.gif
[Fri Jul 20 23:06:42 2012] Mean detx,y = (1228.58, -7315.58) 
[Fri Jul 20 23:06:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:06:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:06:58 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul 20 23:06:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jul 21 00:15:39 2012] Not generating rmf since there are only 76 counts
[Sat Jul 21 00:15:39 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:17 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:17 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Jul 21 02:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:18 2012] Using photon index=1.80, rate=0.00245, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src21.arf
[Sat Jul 21 02:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:18 2012] Updating source flux to 5.2e-14
[Sat Jul 21 02:37:24 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Sat Jul 21 02:37:24 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting