[Thu Jul 19 19:46:14 2012] Detection parameters:
  Position = (309.4, 319.0) = 16 54 10.04 -41 49 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3884.6 +/- 75.8
  Background counts = 45.6
  Rate = 0.1 +/- 0.002

[Thu Jul 19 19:46:16 2012] Off-axis axis estimate = 1.69'
[Thu Jul 19 23:51:11 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 23:51:11 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jul 19 23:51:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Thu Jul 19 23:51:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jul 20 03:17:18 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:17:19 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 03:17:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:17:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 03:17:20 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 03:17:20 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 06:26:01 2012] Spatial fit model total counts = 3953.850000, observed total counts = 3957.000000
[Fri Jul 20 06:26:01 2012] Offset between fit and detection position for source 1 = 0.189664 pixels
[Fri Jul 20 06:26:01 2012] 3932.760000 total counts/ 1380.920000 bgd. counts: snr = 68.670337
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.189664 pixels
  Position = (309.2, 319.0) = 16 54 10.11 -41 49 30.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2551.8 +/- 62.7
  Background counts = 1380.9
  Rate = 0.08 +/- 0.002
[Fri Jul 20 06:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:02 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:02 2012] Source does appear to be extended
[Fri Jul 20 06:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 11:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:42:07 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Fri Jul 20 11:42:07 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.372
[Fri Jul 20 11:42:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 15:21:53 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 15:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 15:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 15:21:54 2012] fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 15:21:54 2012] Fit fullrun_mos1_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 18:24:26 2012] Spatial fit model total counts = 3953.750000, observed total counts = 3957.000000
[Fri Jul 20 18:24:26 2012] Offset between fit and detection position for source 1 = 0.000091 pixels
[Fri Jul 20 18:24:26 2012] 3932.760000 total counts/ 1380.160000 bgd. counts: snr = 68.709699
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000091 pixels
  Position = (309.2, 319.0) = 16 54 10.11 -41 49 30.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2552.6 +/- 62.7
  Background counts = 1380.2
  Rate = 0.08 +/- 0.002
[Fri Jul 20 18:24:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:26 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:26 2012] Source does appear to be extended
[Fri Jul 20 18:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 23:00:15 2012] Counts = 2552.600000, rescaling region sizes by 2.000000
[Fri Jul 20 23:00:15 2012] XMMSAS src. selection expression = ellipse(26849.096740, 27703.129600, 631.390818, 631.390818, 0.000000, X, Y)
[Fri Jul 20 23:00:15 2012] Writing source region out to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 23:00:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (273, 283) - (345, 355)
[Fri Jul 20 23:00:15 2012] XMMSAS bgd. selection expression = annulus(26849.096740, 27703.129600, 2104.636061, 4209.272121, X, Y) && !ellipse(28690.521600, 29045.433000, 432.492812, 432.492812, 0.000000, X, Y) && !ellipse(28299.996000, 30110.714000, 336.958410, 336.958410, 0.000000, X, Y) && !ellipse(29393.242000, 31053.366000, 389.227211, 389.227211, 0.000000, X, Y) && !ellipse(25719.139692, 26581.256787, 580.067217, 329.292319, 138.017929, X, Y) && !ellipse(26502.100460, 25959.592600, 370.636011, 370.636011, 0.000000, X, Y) && !ellipse(24667.335400, 26925.381400, 424.457612, 382.028011, 2.488500, X, Y) && !ellipse(23281.883000, 27191.783400, 298.895209, 298.895209, 0.000000, X, Y) && !ellipse(23183.805511, 27681.698608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25842.306000, 24445.417200, 286.746408, 286.746408, 0.000000, X, Y) && !ellipse(26140.668000, 26486.122000, 268.366408, 268.366408, 0.000000, X, Y) && !ellipse(30075.050000, 23653.299800, 323.568009, 323.568009, 0.000000, X, Y) && !ellipse(24719.118000, 28078.550000, 263.380808, 263.380808, 0.000000, X, Y) && !ellipse(27827.242004, 29812.728668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.088000, 25775.563320, 381.042411, 381.042411, 0.000000, X, Y) && !ellipse(29705.335388, 31440.710327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30939.008260, 29066.550000, 424.383212, 424.383212, 0.000000, X, Y) && !ellipse(31002.516327, 26379.231506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.315491, 27020.906952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27729.862200, 32270.203800, 416.211212, 416.211212, 0.000000, X, Y) && !ellipse(29123.886627, 29938.574402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.852600, 24907.288400, 406.938412, 406.938412, 0.000000, X, Y) && !ellipse(27591.487010, 23699.200019, 903.017289, 341.976633, 323.669588, X, Y) && !ellipse(24220.354400, 29440.837920, 467.205613, 467.205613, 0.000000, X, Y) && !ellipse(26121.021942, 27532.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27556.272369, 30588.557434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.133600, 25866.441380, 371.944011, 371.944011, 0.000000, X, Y) && !ellipse(24491.266724, 28557.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27801.344849, 29033.727142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25662.744000, 25725.724400, 1073.464031, 1073.464031, 0.000000, X, Y) && !ellipse(22637.081600, 26196.838800, 604.710417, 604.710417, 0.000000, X, Y) && !ellipse(27556.726379, 27120.592682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30366.482819, 24388.490540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.431335, 27522.638458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.237500, 27298.902200, 507.452815, 507.452815, 0.000000, X, Y) && !ellipse(25774.880000, 24855.662000, 1076.192031, 1076.192031, 0.000000, X, Y)
[Fri Jul 20 23:00:15 2012] Writing fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 23:00:20 2012] Mean detx,y = (237.70, -222.24) 
[Fri Jul 20 23:00:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 23:00:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 23:00:38 2012] Setting source spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 23:00:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 21 02:37:17 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:17 2012] Error reading totcts from fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 02:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:18 2012] Using photon index=1.80, rate=0.0816, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 02:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:18 2012] Updating source flux to 9.7e-13
[Sat Jul 21 02:39:59 2012] Reading fit data from xmm0109490401/analysis//spectral/fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 21 02:39:59 2012] Spectral fit parameter nH value = 8.53758e+21
[Sat Jul 21 02:39:59 2012] Spectral fit parameter PhoIndex value = 7.43265
[Sat Jul 21 02:39:59 2012] Failed to get F(0.3-8.0) from xmm0109490401/analysis//spectral/fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 02:39:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:39:59 2012] Using Nh = 8.5e+21, photon index=7.43, rate=0.0816, arf fullrun_mos1_xmm0109490401_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 02:39:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:39:59 2012] Updating source flux to 5.6e-13