[Sun Aug 19 08:37:05 2012] Detection parameters:
  Position = (260.0, 301.8) = 16 54 29.06 -41 50 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.4 +/- 22.7
  Background counts = 84.3
  Rate = 0.009 +/- 0.001

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 2.80'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun Aug 19 08:41:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.83"
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57.csv
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57.csv
[Sun Aug 19 13:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:22 2012] Source 64 is offset by 7.410899 and 6.208659 pixels which is larger than
2 X fitted extent = 0.926428 x 0.926428, not incorporating fit results
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Mon Aug 20 00:56:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.83"
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53.csv
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53.csv
[Mon Aug 20 06:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Aug 20 06:34:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Source 64 is offset by 3.110370 and -1.091870 pixels which is larger than
2 X fitted extent = 0.611136 x 0.611136, not incorporating fit results
[Mon Aug 20 16:17:48 2012] Source 64 is offset by 7.196922 and 4.765234 pixels which is larger than
2 X fitted extent = 2.144487 x 2.144487, not incorporating fit results
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:35 2012] XMMSAS src. selection expression = ellipse(22571.452209, 26207.857330, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64_src.reg
[Mon Aug 20 16:19:35 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (222, 264) - (297, 339)
[Mon Aug 20 16:19:35 2012] XMMSAS bgd. selection expression = annulus(22571.452209, 26207.857330, 1087.500000, 2175.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.363922, 28001.260590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.764374, 27709.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23229.947266, 27270.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19528.017349, 27183.044281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.266083, 26917.228058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.839478, 26835.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.044000, 26926.414000, 1069.512031, 1069.512031, 0.000000, X, Y) && !ellipse(21907.709800, 25798.499000, 469.676014, 381.024811, 58.431700, X, Y) && !ellipse(23344.912689, 24502.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23096.784271, 28486.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19549.977097, 27991.264404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 26860.219269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22458.759491, 28495.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21180.750519, 28380.393463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.232452, 27667.642883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.878479, 26340.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.302460, 26373.621429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.390503, 25610.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.345673, 25359.315277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.404144, 24999.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.751251, 24421.160675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20793.379089, 24556.633545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.787323, 23784.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20755.141357, 23405.513733, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64.gif
[Mon Aug 20 17:27:08 2012] Mean detx,y = (-4446.46, 782.49) 
[Mon Aug 20 17:27:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:27:30 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:27:30 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Mon Aug 20 17:27:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Mon Aug 20 22:59:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 22:59:42 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:38 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:38 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Tue Aug 21 05:12:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:47 2012] Using photon index=1.80, rate=0.00931, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src64.arf
[Tue Aug 21 05:12:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:47 2012] Updating source flux to 4.1e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting