[Sun Aug 19 08:37:05 2012] Detection parameters:
  Position = (266.0, 328.0) = 16 54 26.71 -41 48 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.0 +/- 19.0
  Background counts = 82.9
  Rate = 0.01 +/- 0.001

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 3.18'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Sun Aug 19 08:41:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.546
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.02"
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55.csv
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55.csv
[Sun Aug 19 13:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:22 2012] Source 61 is offset by -7.360960 and 5.733421 pixels which is larger than
2 X fitted extent = 1.244397 x 0.946164, not incorporating fit results
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:54:23 2012] Source is confused with source 118
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon Aug 20 00:56:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.546
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.02"
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51.csv
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51_1.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51.csv
[Mon Aug 20 06:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon Aug 20 06:34:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Warning, spatial fit 51 centroid is now closest to src. 118
[Mon Aug 20 16:17:48 2012] Source 61 is offset by 0.096187 and -8.966210 pixels which is larger than
2 X fitted extent = 3.564598 x 3.564598, not incorporating fit results
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:35 2012] XMMSAS src. selection expression = ellipse(23096.784271, 28486.655701, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61_src.reg
[Mon Aug 20 16:19:35 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (229, 290) - (304, 365)
[Mon Aug 20 16:19:35 2012] XMMSAS bgd. selection expression = annulus(23096.784271, 28486.655701, 1087.500000, 2175.000000, X, Y) && !ellipse(21876.535896, 29179.287000, 426.218412, 426.218412, 0.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.363922, 28001.260590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.764374, 27709.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23229.947266, 27270.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.266083, 26917.228058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.839478, 26835.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.044000, 26926.414000, 1069.512031, 1069.512031, 0.000000, X, Y) && !ellipse(24877.005310, 26860.219269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22571.452209, 26207.857330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.353912, 31084.854095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20500.514755, 30958.979156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.329841, 30448.767067, 774.279264, 395.413005, 90.435077, X, Y) && !ellipse(22842.393760, 29237.901800, 508.344815, 508.344815, 0.000000, X, Y) && !ellipse(22458.759491, 28495.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21180.750519, 28380.393463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.232452, 27667.642883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.878479, 26340.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.302460, 26373.621429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.390503, 25610.770447, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61.gif
[Mon Aug 20 17:23:47 2012] Mean detx,y = (-3562.77, -1453.44) 
[Mon Aug 20 17:23:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:24:22 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:24:22 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon Aug 20 17:24:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Mon Aug 20 22:58:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 22:58:26 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:38 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:38 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Aug 21 05:12:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:47 2012] Using photon index=1.80, rate=0.0104, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src61.arf
[Tue Aug 21 05:12:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:47 2012] Updating source flux to 5.3e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting