[Sun Aug 19 08:37:05 2012] Detection parameters:
  Position = (307.8, 333.8) = 16 54 10.46 -41 48 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.2 +/- 22.6
  Background counts = 103.1
  Rate = 0.01 +/- 0.001

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 2.65'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Aug 19 08:41:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.720
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.75"
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54.csv
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54.csv
[Sun Aug 19 13:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:21 2012] Source 60 is offset by 6.493973 and 6.104721 pixels which is larger than
2 X fitted extent = 0.837209 x 0.837209, not incorporating fit results
[Mon Aug 20 00:54:22 2012] Spatial fit model total counts = 2019.620000, observed total counts = 1420.000000
[Mon Aug 20 00:54:22 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Aug 20 00:56:20 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.720
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 7.75"
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50.csv
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50.csv
[Mon Aug 20 06:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Mon Aug 20 06:34:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Source 60 is offset by -5.006234 and 2.770422 pixels which is larger than
2 X fitted extent = 2.144487 x 2.144487, not incorporating fit results
[Mon Aug 20 16:17:48 2012] Warning, spatial fit 50 centroid is now closest to src. 21
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:35 2012] XMMSAS src. selection expression = ellipse(26729.777679, 28992.308685, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60_src.reg
[Mon Aug 20 16:19:35 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (270, 296) - (345, 371)
[Mon Aug 20 16:19:35 2012] XMMSAS bgd. selection expression = annulus(26729.777679, 28992.308685, 1087.500000, 2175.000000, X, Y) && !ellipse(26784.357600, 27756.440600, 1406.128840, 1406.128840, 0.000000, X, Y) && !ellipse(28686.120000, 29368.494000, 391.728011, 391.728011, 0.000000, X, Y) && !ellipse(28239.253640, 30156.347400, 438.217613, 389.080811, 342.680900, X, Y) && !ellipse(29574.997345, 31628.585510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29056.148865, 29961.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.876404, 30149.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26658.386597, 29782.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.363922, 28001.260590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.764374, 27709.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.327040, 26954.930600, 407.976812, 407.976812, 0.000000, X, Y) && !ellipse(24437.266083, 26917.228058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.839478, 26835.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.044000, 26926.414000, 1069.512031, 1069.512031, 0.000000, X, Y) && !ellipse(27223.960938, 31394.934967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.839355, 29168.554840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 26860.219269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.843201, 31781.363861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29728.872223, 31193.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.395050, 31010.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.353912, 31084.854095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.343292, 30651.675446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.408000, 30420.062000, 1368.496039, 1368.496039, 0.000000, X, Y) && !ellipse(26439.041351, 30397.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.167877, 28328.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.509247, 28222.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.463684, 27339.778625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29014.467560, 26863.118561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.683502, 26571.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.302460, 26373.621429, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60.gif
[Mon Aug 20 17:22:48 2012] Mean detx,y = (109.55, -1468.48) 
[Mon Aug 20 17:22:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:23:18 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:23:19 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Aug 20 17:23:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Aug 20 22:52:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 22:52:24 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:38 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:38 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Aug 21 05:12:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:47 2012] Using photon index=1.80, rate=0.0118, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src60.arf
[Tue Aug 21 05:12:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:47 2012] Updating source flux to 4.4e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting