[Sun Aug 19 08:37:05 2012] Detection parameters:
  Position = (313.5, 361.4) = 16 54 8.25 -41 46 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.5 +/- 20.7
  Background counts = 82.4
  Rate = 0.009 +/- 0.0009

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 4.69'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Sun Aug 19 08:41:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.671
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 8.78"
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51.csv
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Aug 19 13:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51.csv
[Sun Aug 19 13:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:22 2012] Warning, spatial fit 51 centroid is now closest to src. 98
[Mon Aug 20 00:54:23 2012] Source 57 is offset by 5.776428 and 4.070954 pixels which is larger than
2 X fitted extent = 2.000478 x 2.000478, not incorporating fit results
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Aug 20 00:56:20 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.671
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 8.78"
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48.csv
[Mon Aug 20 06:34:01 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Aug 20 06:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48.csv
[Mon Aug 20 06:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Aug 20 06:34:03 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Aug 20 06:34:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Aug 20 06:34:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Spatial fit model total counts = 1381.780000, observed total counts = 1158.000000
[Mon Aug 20 16:17:48 2012] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:34 2012] XMMSAS src. selection expression = ellipse(27223.960938, 31394.934967, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:34 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57_src.reg
[Mon Aug 20 16:19:34 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (276, 324) - (351, 399)
[Mon Aug 20 16:19:35 2012] XMMSAS bgd. selection expression = annulus(27223.960938, 31394.934967, 1087.500000, 2175.000000, X, Y) && !ellipse(28686.120000, 29368.494000, 391.728011, 391.728011, 0.000000, X, Y) && !ellipse(28239.253640, 30156.347400, 438.217613, 389.080811, 342.680900, X, Y) && !ellipse(26124.948730, 33021.522736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.997345, 31628.585510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29056.148865, 29961.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.876404, 30149.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26658.386597, 29782.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.839355, 29168.554840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.777679, 28992.308685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.636353, 33046.227783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28933.072000, 32696.908000, 1491.536043, 1491.536043, 0.000000, X, Y) && !ellipse(27637.203320, 32280.535200, 366.385611, 366.385611, 0.000000, X, Y) && !ellipse(26338.843201, 31781.363861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30259.280701, 31606.978882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29728.872223, 31193.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.395050, 31010.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.353912, 31084.854095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.343292, 30651.675446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.408000, 30420.062000, 1368.496039, 1368.496039, 0.000000, X, Y) && !ellipse(26439.041351, 30397.982086, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:35 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57.gif
[Mon Aug 20 17:20:58 2012] Mean detx,y = (1044.72, -3762.28) 
[Mon Aug 20 17:21:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:21:23 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:21:23 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Aug 20 17:21:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Aug 20 22:46:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 22:46:11 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:38 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:38 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Aug 21 05:12:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:47 2012] Using photon index=1.80, rate=0.00935, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src57.arf
[Tue Aug 21 05:12:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:47 2012] Updating source flux to 4.2e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting