[Sun Aug 19 08:37:04 2012] Detection parameters:
  Position = (355.7, 305.1) = 16 53 51.83 -41 50 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 400.2 +/- 26.3
  Background counts = 70.9
  Rate = 0.02 +/- 0.001

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 4.18'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sun Aug 19 08:41:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.869
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.52"
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28.csv
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28.csv
[Sun Aug 19 13:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:22 2012] Warning, spatial fit 28 centroid is now closest to src. 126
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Mon Aug 20 00:56:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.869
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.52"
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26.ximg exists
[Mon Aug 20 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26.csv
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Aug 20 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26.csv
[Mon Aug 20 06:34:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Aug 20 06:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Aug 20 06:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Aug 20 06:34:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Spatial fit model total counts = 1105.910000, observed total counts = 956.000000
[Mon Aug 20 16:17:48 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:33 2012] XMMSAS src. selection expression = ellipse(30893.344177, 26493.235809, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:33 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33_src.reg
[Mon Aug 20 16:19:33 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (318, 268) - (393, 343)
[Mon Aug 20 16:19:33 2012] XMMSAS bgd. selection expression = annulus(30893.344177, 26493.235809, 1087.500000, 2175.000000, X, Y) && !ellipse(30283.611389, 24304.071228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.377899, 24380.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30990.258057, 28555.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31960.421692, 28241.723938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.167877, 28328.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.509247, 28222.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.463684, 27339.778625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31476.460297, 26870.895142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29014.467560, 26863.118561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.683502, 26571.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28587.403442, 25818.839783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.997345, 25569.426331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33096.306946, 25106.938812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.187256, 24962.510529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.166748, 23970.214569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31666.241791, 23698.554626, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:33 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33.gif
[Mon Aug 20 17:00:03 2012] Mean detx,y = (4044.19, 1599.73) 
[Mon Aug 20 17:00:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:00:23 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:00:24 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Aug 20 17:00:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon Aug 20 22:22:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 22:22:11 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:37 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:37 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Aug 21 05:12:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:45 2012] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src33.arf
[Tue Aug 21 05:12:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:45 2012] Updating source flux to 6.3e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting