[Sun Aug 19 08:37:04 2012] Detection parameters:
  Position = (304.4, 299.2) = 16 54 11.79 -41 50 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3383.8 +/- 71.9
  Background counts = 106.3
  Rate = 0.1 +/- 0.003

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 0.43'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 6.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Sun Aug 19 08:41:31 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.973
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.65"
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 13:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Aug 19 13:27:58 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Aug 19 13:27:58 2012] Fit fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 20 00:54:21 2012] Source 3 is offset by -5.733990 and -6.896008 pixels which is larger than
2 X fitted extent = 0.763880 x 0.763880, not incorporating fit results
[Mon Aug 20 00:54:22 2012] Source 3 is offset by -1.564565 and 5.095073 pixels which is larger than
2 X fitted extent = 3.484202 x 3.484202, not incorporating fit results
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 6.65 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Mon Aug 20 00:56:20 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.973
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.65"
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 20 06:34:00 2012] Fit fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 20 06:34:02 2012] Fit fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 20 16:17:47 2012] Spatial fit model total counts = 5492.900000, observed total counts = 5447.000000
[Mon Aug 20 16:17:47 2012] Offset between fit and detection position for source 3 = 0.147414 pixels
[Mon Aug 20 16:17:47 2012] 5363.360000 total counts/ 3200.190000 bgd. counts: snr = 38.238669
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.147414 pixels
  Position = (304.4, 299.4) = 16 54 11.79 -41 50 58.3
  Extent = 6.0" x 5.3", rotation angle = 60
  Source counts = 2163.2 +/- 73.2
  Background counts = 3200.2
  Rate = 0.07 +/- 0.002
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Mon Aug 20 16:19:30 2012] Counts = 2163.170000, rescaling region sizes by 2.000000
[Mon Aug 20 16:19:30 2012] XMMSAS src. selection expression = ellipse(26432.793751, 25996.022989, 719.336692, 638.325699, 60.047970, X, Y)
[Mon Aug 20 16:19:30 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3_src.reg
[Mon Aug 20 16:19:30 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (263, 258) - (346, 341)
[Mon Aug 20 16:19:30 2012] XMMSAS bgd. selection expression = annulus(26432.793751, 25996.022989, 2397.788974, 4795.577948, X, Y) && !ellipse(26784.357600, 27756.440600, 1406.128840, 1406.128840, 0.000000, X, Y) && !ellipse(28686.120000, 29368.494000, 391.728011, 391.728011, 0.000000, X, Y) && !ellipse(28239.253640, 30156.347400, 438.217613, 389.080811, 342.680900, X, Y) && !ellipse(29574.997345, 31628.585510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29056.148865, 29961.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.876404, 30149.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26658.386597, 29782.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21876.535896, 29179.287000, 426.218412, 426.218412, 0.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.363922, 28001.260590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.764374, 27709.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23229.947266, 27270.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.327040, 26954.930600, 407.976812, 407.976812, 0.000000, X, Y) && !ellipse(24437.266083, 26917.228058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.839478, 26835.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.044000, 26926.414000, 1069.512031, 1069.512031, 0.000000, X, Y) && !ellipse(30893.344177, 26493.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.156372, 25851.794006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21907.709800, 25798.499000, 469.676014, 381.024811, 58.431700, X, Y) && !ellipse(27083.313416, 24940.733978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23344.912689, 24502.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30012.192000, 23840.704000, 333.743210, 333.743210, 0.000000, X, Y) && !ellipse(28547.507600, 23135.852000, 420.664012, 420.664012, 0.000000, X, Y) && !ellipse(23251.277771, 21902.611832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20911.978380, 20601.935800, 905.120026, 442.556013, 62.370066, X, Y) && !ellipse(21356.127880, 31472.854000, 694.616020, 694.616020, 0.000000, X, Y) && !ellipse(27223.960938, 31394.934967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.839355, 29168.554840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.777679, 28992.308685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23096.784271, 28486.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 26860.219269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22571.452209, 26207.857330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30283.611389, 24304.071228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.377899, 24380.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.344818, 21230.387619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21920.704400, 21045.159200, 551.150416, 346.796810, 28.075600, X, Y) && !ellipse(30259.280701, 31606.978882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29728.872223, 31193.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.395050, 31010.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.353912, 31084.854095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.343292, 30651.675446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.408000, 30420.062000, 1368.496039, 1368.496039, 0.000000, X, Y) && !ellipse(26439.041351, 30397.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.329841, 30448.767067, 774.279264, 395.413005, 90.435077, X, Y) && !ellipse(30392.414490, 30045.237549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22842.393760, 29237.901800, 508.344815, 508.344815, 0.000000, X, Y) && !ellipse(30990.258057, 28555.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22458.759491, 28495.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21180.750519, 28380.393463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31960.421692, 28241.723938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.167877, 28328.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.509247, 28222.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.232452, 27667.642883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.463684, 27339.778625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31476.460297, 26870.895142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29014.467560, 26863.118561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.683502, 26571.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.878479, 26340.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.302460, 26373.621429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28587.403442, 25818.839783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.997345, 25569.426331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.390503, 25610.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.345673, 25359.315277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.187256, 24962.510529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.404144, 24999.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.751251, 24421.160675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20793.379089, 24556.633545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.166748, 23970.214569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.256989, 24048.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.692383, 23811.053528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31666.241791, 23698.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.787323, 23784.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27321.830627, 23624.428864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.718414, 23522.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22830.710510, 22683.515686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20959.724640, 22671.026428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22448.351776, 22360.125153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.025269, 22165.267242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.151154, 21881.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21944.269241, 21519.765900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30130.248932, 21130.109818, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:30 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3.gif
[Mon Aug 20 16:25:48 2012] Mean detx,y = (-551.32, 1447.34) 
[Mon Aug 20 16:25:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 16:26:46 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 16:26:47 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Aug 20 16:26:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 21 05:12:36 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:36 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 05:12:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:44 2012] Using photon index=1.80, rate=0.0681, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src3.arf
[Tue Aug 21 05:12:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:44 2012] Updating source flux to 2.5e-13
[Tue Aug 21 05:28:09 2012] Flag b found in src. 3 procflags, skipping spectral fitting