[Sun Aug 19 08:37:04 2012] Detection parameters:
  Position = (294.0, 319.1) = 16 54 15.84 -41 49 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 473.2 +/- 31.9
  Background counts = 107.8
  Rate = 0.02 +/- 0.001

[Sun Aug 19 08:37:07 2012] Off-axis axis estimate = 1.53'
[Sun Aug 19 08:41:31 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 08:41:31 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sun Aug 19 08:41:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Sun Aug 19 08:41:31 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.19"
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22.csv
[Sun Aug 19 13:27:57 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Aug 19 13:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22.csv
[Sun Aug 19 13:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Aug 19 13:27:59 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Aug 19 13:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Aug 19 13:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:22 2012] Source 26 is offset by -2.833444 and -8.839901 pixels which is larger than
2 X fitted extent = 1.012713 x 1.012713, not incorporating fit results
[Mon Aug 20 00:54:22 2012] Warning, spatial fit 22 centroid is now closest to src. 25
[Mon Aug 20 00:54:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:23 2012] Assessing source extent using major
[Mon Aug 20 00:54:23 2012] Source does appear to be extended
[Mon Aug 20 00:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:56:20 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 00:56:20 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Mon Aug 20 00:56:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Mon Aug 20 00:56:20 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.19"
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20.ximg exists
[Mon Aug 20 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20.csv
[Mon Aug 20 06:34:00 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Aug 20 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20.csv
[Mon Aug 20 06:34:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Aug 20 06:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Aug 20 06:34:02 2012] fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Aug 20 06:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Aug 20 06:34:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:48 2012] Warning, spatial fit 20 centroid is now closest to src. 25
[Mon Aug 20 16:17:48 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.595947 pixels away
[Mon Aug 20 16:17:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:17:48 2012] Assessing source extent using major
[Mon Aug 20 16:17:48 2012] Source does appear to be extended
[Mon Aug 20 16:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:19:32 2012] XMMSAS src. selection expression = ellipse(25525.764374, 27709.671997, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 16:19:32 2012] Writing source region out to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26_src.reg
[Mon Aug 20 16:19:32 2012] Extracting stamp from image fullrun_pn_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (256, 282) - (331, 357)
[Mon Aug 20 16:19:32 2012] XMMSAS bgd. selection expression = annulus(25525.764374, 27709.671997, 1087.500000, 2175.000000, X, Y) && !ellipse(26784.357600, 27756.440600, 1406.128840, 1406.128840, 0.000000, X, Y) && !ellipse(26432.793751, 25996.022989, 479.557795, 425.550466, 60.047970, X, Y) && !ellipse(27288.876404, 30149.662506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26658.386597, 29782.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.856628, 28993.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24619.363922, 28001.260590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23229.947266, 27270.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.327040, 26954.930600, 407.976812, 407.976812, 0.000000, X, Y) && !ellipse(24437.266083, 26917.228058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.839478, 26835.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.044000, 26926.414000, 1069.512031, 1069.512031, 0.000000, X, Y) && !ellipse(27526.156372, 25851.794006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.313416, 24940.733978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.839355, 29168.554840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.777679, 28992.308685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23096.784271, 28486.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.005310, 26860.219269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22571.452209, 26207.857330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.343292, 30651.675446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.041351, 30397.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.509247, 28222.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.683502, 26571.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.878479, 26340.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.302460, 26373.621429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.390503, 25610.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.345673, 25359.315277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.187256, 24962.510529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.404144, 24999.088867, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 16:19:32 2012] Writing fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26.gif
[Mon Aug 20 16:48:15 2012] Mean detx,y = (-1114.43, -296.60) 
[Mon Aug 20 16:48:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 16:48:40 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 16:48:41 2012] Setting source spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Aug 20 16:48:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Aug 20 20:11:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 20:11:23 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:37 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:37 2012] Error reading totcts from fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Aug 21 05:12:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:45 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0109490301_pi300-10000_pass1_cl_src26.arf
[Tue Aug 21 05:12:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:45 2012] Updating source flux to 6.6e-14
[Tue Aug 21 05:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting