[Sun Aug 19 08:38:45 2012] Detection parameters:
  Position = (252.3, 242.4) = 16 54 32.07 -41 55 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 11.5
  Background counts = 22.1
  Rate = 0.003 +/- 0.0005

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 5.26'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Sun Aug 19 19:33:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 9.06"
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src58.ximg exists
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src58_1.ximg exists
[Mon Aug 20 00:53:42 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src58 appears to have run properly
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Aug 20 00:53:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:55:24 2012] Warning, spatial fit 58 centroid is now closest to src. 100
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 11:08:07 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Mon Aug 20 11:08:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 9.06"
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56.csv
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56.csv
[Mon Aug 20 16:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Aug 20 16:17:16 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Mon Aug 20 16:18:37 2012] Spatial fit model total counts = 269.247000, observed total counts = 249.000000
[Mon Aug 20 16:18:37 2012] Offset between fit and detection position for source 96 = 0.102556 pixels
[Mon Aug 20 16:18:37 2012] 273.135900 total counts/ 229.168000 bgd. counts: snr = 2.904415
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 0.102556 pixels
  Position = (252.3, 242.3) = 16 54 32.09 -41 55 6.3
  Extent = 4.4 (3.4-5.6)", rotation angle = 0
  Source counts = 44.0 +/- 16.5
  Background counts = 229.2
  Rate = 0.001 +/- 0.0005
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:51 2012] XMMSAS src. selection expression = ellipse(21899.860400, 21032.906800, 263.740208, 263.740208, 0.000000, X, Y)
[Tue Aug 21 02:32:51 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96_src.reg
[Tue Aug 21 02:32:51 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (237, 227) - (267, 257)
[Tue Aug 21 02:32:51 2012] XMMSAS bgd. selection expression = annulus(21899.860400, 21032.906800, 439.567013, 879.134025, X, Y) && !ellipse(21593.031433, 19351.404800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22345.867645, 19876.666504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20939.454819, 20499.296097, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:51 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96.gif
[Tue Aug 21 02:59:37 2012] Mean detx,y = (5773.79, -5977.56) 
[Tue Aug 21 02:59:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 02:59:52 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 02:59:52 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Tue Aug 21 02:59:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Tue Aug 21 04:55:58 2012] Not generating rmf since there are only 43 counts
[Tue Aug 21 04:55:58 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:05 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:05 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Tue Aug 21 05:13:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:08 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src96.arf
[Tue Aug 21 05:13:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:08 2012] Updating source flux to 2.9e-14
[Tue Aug 21 05:20:13 2012] Source 96 has fewer than 100.000000 counts, skipping spectral fitting