[Sun Aug 19 08:38:44 2012] Detection parameters:
  Position = (317.1, 297.4) = 16 54 6.83 -41 51 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.8 +/- 17.7
  Background counts = 45.3
  Rate = 0.006 +/- 0.0006

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 1.36'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Sun Aug 19 19:33:19 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.714
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.11"
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26.csv
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26.csv
[Mon Aug 20 00:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Aug 20 00:53:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:55:24 2012] Source 75 is offset by -6.435582 and -7.050863 pixels which is larger than
2 X fitted extent = 6.521117 x 0.816795, not incorporating fit results
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 11:08:07 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Mon Aug 20 11:08:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.714
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.11"
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25.csv
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25.csv
[Mon Aug 20 16:17:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:15 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Aug 20 16:17:15 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Aug 20 16:17:15 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Aug 20 16:18:37 2012] Warning, spatial fit 25 centroid is now closest to src. 65
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:50 2012] XMMSAS src. selection expression = ellipse(27539.094330, 25824.487030, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 02:32:50 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75_src.reg
[Tue Aug 21 02:32:50 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (280, 260) - (355, 335)
[Tue Aug 21 02:32:50 2012] XMMSAS bgd. selection expression = annulus(27539.094330, 25824.487030, 1087.500000, 2175.000000, X, Y) && !ellipse(26792.731079, 27765.308136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26427.647400, 25988.812000, 368.480011, 368.480011, 0.000000, X, Y) && !ellipse(25859.464200, 26930.568400, 542.228816, 542.228816, 0.000000, X, Y) && !ellipse(30009.184400, 23714.083800, 304.120009, 304.120009, 0.000000, X, Y) && !ellipse(24566.189800, 28315.550800, 854.392025, 395.913611, 71.634400, X, Y) && !ellipse(25531.262939, 27698.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.134000, 24907.550600, 1129.112032, 1129.112032, 0.000000, X, Y) && !ellipse(25057.486400, 24015.600600, 403.534412, 403.534412, 0.000000, X, Y) && !ellipse(26481.747498, 27105.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.348511, 28804.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28722.296600, 27292.492800, 205.284806, 205.284806, 0.000000, X, Y) && !ellipse(29489.566467, 24375.464966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25189.389073, 25615.409759, 696.984820, 522.979903, 350.849704, X, Y) && !ellipse(26285.333740, 25465.511139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.128000, 25697.050000, 1056.904030, 1056.904030, 0.000000, X, Y) && !ellipse(26535.081726, 24091.822876, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:50 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75.gif
[Tue Aug 21 02:47:29 2012] Mean detx,y = (-349.79, -1915.61) 
[Tue Aug 21 02:47:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 02:47:52 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 02:47:52 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Aug 21 02:47:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue Aug 21 04:34:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 04:34:11 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:03 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:03 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Aug 21 05:13:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:07 2012] Using photon index=1.80, rate=0.00604, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src75.arf
[Tue Aug 21 05:13:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:07 2012] Updating source flux to 8.2e-14
[Tue Aug 21 05:20:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting