[Sun Aug 19 08:38:44 2012] Detection parameters:
  Position = (272.3, 309.0) = 16 54 24.29 -41 50 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.6 +/- 24.7
  Background counts = 41.4
  Rate = 0.01 +/- 0.0008

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 2.05'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Aug 19 19:33:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.45"
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13.csv
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13.csv
[Mon Aug 20 00:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Aug 20 00:53:43 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Aug 20 00:55:24 2012] Warning, spatial fit 13 centroid is now closest to src. 64
[Mon Aug 20 00:55:24 2012] Spatial fit model total counts = 679.655000, observed total counts = 677.000000
[Mon Aug 20 00:55:24 2012] Offset between fit and detection position for source 69 = 7.133212 pixels
[Mon Aug 20 00:55:24 2012] Warning, changing simple spatial fit ID from 13 to 56
[Mon Aug 20 00:55:24 2012] 601.030000 total counts/ 417.326000 bgd. counts: snr = 8.992509
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 7.133212 pixels
  Position = (265.6, 306.6) = 16 54 26.89 -41 50 26.9
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 183.7 +/- 24.5
  Background counts = 417.3
  Rate = 0.005 +/- 0.0007
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:55:25 2012] Source is confused with source 64
[Mon Aug 20 11:08:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 15.66"
[Mon Aug 20 11:08:07 2012] source mask rpix=3.6, npix_max = 67, mask sum = 81, frac = 1.204
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 15.66"
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13.csv
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13.csv
[Mon Aug 20 16:17:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:14 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Aug 20 16:17:14 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Aug 20 16:17:14 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Aug 20 16:18:37 2012] Warning, spatial fit 13 centroid is now closest to src. 72
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:49 2012] XMMSAS src. selection expression = ellipse(23056.192000, 26623.030000, 939.768027, 939.768027, 0.000000, X, Y)
[Tue Aug 21 02:32:49 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69_src.reg
[Tue Aug 21 02:32:49 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (212, 253) - (320, 361)
[Tue Aug 21 02:32:49 2012] XMMSAS bgd. selection expression = annulus(23056.192000, 26623.030000, 1566.280045, 3132.560090, X, Y) && !ellipse(26792.731079, 27765.308136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26427.647400, 25988.812000, 368.480011, 368.480011, 0.000000, X, Y) && !ellipse(24598.236000, 26956.865200, 373.905611, 373.905611, 0.000000, X, Y) && !ellipse(25859.464200, 26930.568400, 542.228816, 542.228816, 0.000000, X, Y) && !ellipse(23218.019600, 27235.417600, 339.032010, 339.032010, 0.000000, X, Y) && !ellipse(21915.526200, 25806.813600, 357.084010, 357.084010, 0.000000, X, Y) && !ellipse(24566.189800, 28315.550800, 854.392025, 395.913611, 71.634400, X, Y) && !ellipse(21867.444760, 29186.965200, 393.430411, 393.430411, 0.000000, X, Y) && !ellipse(24106.064200, 29448.035800, 415.973612, 415.973612, 0.000000, X, Y) && !ellipse(25531.262939, 27698.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.134000, 24907.550600, 1129.112032, 1129.112032, 0.000000, X, Y) && !ellipse(23440.320052, 24522.604600, 293.175208, 293.175208, 0.000000, X, Y) && !ellipse(26675.601807, 29794.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25057.486400, 24015.600600, 403.534412, 403.534412, 0.000000, X, Y) && !ellipse(19557.408524, 27771.727997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.747498, 27105.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23390.766000, 28139.950000, 301.834409, 301.834409, 0.000000, X, Y) && !ellipse(26730.348511, 28804.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.926758, 29118.921722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21944.986000, 25803.634000, 329.947209, 329.947209, 0.000000, X, Y) && !ellipse(25189.389073, 25615.409759, 696.984820, 522.979903, 350.849704, X, Y) && !ellipse(26417.344452, 30365.354431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.333740, 25465.511139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.128000, 25697.050000, 1056.904030, 1056.904030, 0.000000, X, Y) && !ellipse(23976.923828, 28475.693085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26535.081726, 24091.822876, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:49 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69.gif
[Tue Aug 21 02:41:59 2012] Mean detx,y = (3754.95, -408.36) 
[Tue Aug 21 02:42:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 02:42:18 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 02:42:18 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Aug 21 02:42:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue Aug 21 05:13:02 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:03 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Aug 21 05:13:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:07 2012] Using photon index=1.80, rate=0.00535, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src69.arf
[Tue Aug 21 05:13:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:07 2012] Updating source flux to 6.6e-14
[Tue Aug 21 05:20:13 2012] Flag c found in src. 69 procflags, skipping spectral fitting