[Sun Aug 19 08:38:44 2012] Detection parameters:
  Position = (307.2, 343.0) = 16 54 10.70 -41 47 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.7 +/- 16.9
  Background counts = 39.7
  Rate = 0.005 +/- 0.0006

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 3.29'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sun Aug 19 19:33:19 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.08"
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31.csv
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31.csv
[Mon Aug 20 00:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 20 00:53:44 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Aug 20 00:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 20 00:53:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:55:24 2012] Warning, spatial fit 31 centroid is now closest to src. 51
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:55:25 2012] Source is confused with source 41
[Mon Aug 20 11:08:07 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Mon Aug 20 11:08:07 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.08"
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30.csv
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30.csv
[Mon Aug 20 16:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:15 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Aug 20 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Aug 20 16:17:15 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Aug 20 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Aug 20 16:17:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:18:37 2012] Warning, spatial fit 30 centroid is now closest to src. 40
[Mon Aug 20 16:18:37 2012] Source 47 is offset by 6.234940 and 3.963912 pixels which is larger than
2 X fitted extent = 0.882671 x 0.882671, not incorporating fit results
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:50 2012] XMMSAS src. selection expression = ellipse(26675.601807, 29794.698364, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 02:32:50 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47_src.reg
[Tue Aug 21 02:32:50 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (270, 306) - (345, 381)
[Tue Aug 21 02:32:50 2012] XMMSAS bgd. selection expression = annulus(26675.601807, 29794.698364, 1087.500000, 2175.000000, X, Y) && !ellipse(26792.731079, 27765.308136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28613.830400, 29088.475400, 408.891212, 408.891212, 0.000000, X, Y) && !ellipse(28228.090560, 30158.984800, 379.068011, 379.068011, 0.000000, X, Y) && !ellipse(24566.189800, 28315.550800, 854.392025, 395.913611, 71.634400, X, Y) && !ellipse(29026.043488, 29959.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.064200, 29448.035800, 415.973612, 415.973612, 0.000000, X, Y) && !ellipse(27276.267670, 30178.450989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.262939, 27698.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.920000, 30500.318000, 1368.680039, 1368.680039, 0.000000, X, Y) && !ellipse(27447.105530, 30655.365936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.747498, 27105.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.505096, 31391.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.685425, 29089.989868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.348511, 28804.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.926758, 29118.921722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.344452, 30365.354431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.447479, 31764.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23976.923828, 28475.693085, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:50 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47.gif
[Tue Aug 21 02:49:38 2012] Mean detx,y = (-25.07, 2149.94) 
[Tue Aug 21 02:49:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 02:49:58 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 02:49:59 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Aug 21 02:49:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Aug 21 04:47:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 04:47:49 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:03 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:03 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Aug 21 05:13:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:08 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src47.arf
[Tue Aug 21 05:13:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:08 2012] Updating source flux to 6.1e-14
[Tue Aug 21 05:20:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting