[Sun Aug 19 08:38:44 2012] Detection parameters:
  Position = (304.2, 349.6) = 16 54 11.85 -41 47 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 13.2
  Background counts = 30.5
  Rate = 0.003 +/- 0.0005

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 3.73'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sun Aug 19 19:33:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.29"
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61.csv
[Mon Aug 20 00:53:42 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Aug 20 00:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61.csv
[Mon Aug 20 00:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Aug 20 00:53:45 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Mon Aug 20 00:55:24 2012] Warning, spatial fit 61 centroid is now closest to src. 45
[Mon Aug 20 00:55:25 2012] Source 41 is offset by 7.299255 and 6.313414 pixels which is larger than
2 X fitted extent = 1.737986 x 1.737986, not incorporating fit results
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:55:25 2012] Source is confused with source 47
[Mon Aug 20 11:08:07 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Mon Aug 20 11:08:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.29"
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59.csv
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59.csv
[Mon Aug 20 16:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Aug 20 16:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Aug 20 16:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Aug 20 16:17:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:18:37 2012] Warning, spatial fit 59 centroid is now closest to src. 34
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:52 2012] XMMSAS src. selection expression = ellipse(26417.344452, 30365.354431, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41_src.reg
[Tue Aug 21 02:32:52 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (267, 312) - (342, 387)
[Tue Aug 21 02:32:52 2012] XMMSAS bgd. selection expression = annulus(26417.344452, 30365.354431, 1087.500000, 2175.000000, X, Y) && !ellipse(26792.731079, 27765.308136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28613.830400, 29088.475400, 408.891212, 408.891212, 0.000000, X, Y) && !ellipse(28228.090560, 30158.984800, 379.068011, 379.068011, 0.000000, X, Y) && !ellipse(24566.189800, 28315.550800, 854.392025, 395.913611, 71.634400, X, Y) && !ellipse(26089.087250, 33022.481201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29026.043488, 29959.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.064200, 29448.035800, 415.973612, 415.973612, 0.000000, X, Y) && !ellipse(27276.267670, 30178.450989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.262939, 27698.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.920000, 30500.318000, 1368.680039, 1368.680039, 0.000000, X, Y) && !ellipse(26675.601807, 29794.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.105530, 30655.365936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.505096, 31391.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.685425, 29089.989868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.348511, 28804.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.926758, 29118.921722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.447479, 31764.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23976.923828, 28475.693085, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41.gif
[Tue Aug 21 03:00:41 2012] Mean detx,y = (63.16, 2601.48) 
[Tue Aug 21 03:00:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 03:00:53 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 03:00:54 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Aug 21 03:00:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue Aug 21 04:56:21 2012] Not generating rmf since there are only 76 counts
[Tue Aug 21 04:56:21 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:05 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:05 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Aug 21 05:13:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:08 2012] Using photon index=1.80, rate=0.00274, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src41.arf
[Tue Aug 21 05:13:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:08 2012] Updating source flux to 3.6e-14
[Tue Aug 21 05:20:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting