[Sun Aug 19 08:38:43 2012] Detection parameters:
  Position = (325.2, 347.1) = 16 54 3.69 -41 47 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1583.9 +/- 48.7
  Background counts = 37.5
  Rate = 0.05 +/- 0.002

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 4.03'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Aug 19 19:33:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.44"
[Mon Aug 20 00:53:41 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 20 00:53:41 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 20 00:53:41 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 20 00:53:43 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 20 00:55:24 2012] Spatial fit model total counts = 1942.780000, observed total counts = 1946.000000
[Mon Aug 20 00:55:24 2012] Offset between fit and detection position for source 4 = 0.198218 pixels
[Mon Aug 20 00:55:24 2012] 1920.093000 total counts/ 901.183000 bgd. counts: snr = 33.941367
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.198218 pixels
  Position = (325.0, 347.2) = 16 54 3.76 -41 47 30.1
  Extent = 4.7 (4.5-5.0)", rotation angle = 0
  Source counts = 1018.9 +/- 43.8
  Background counts = 901.2
  Rate = 0.03 +/- 0.001
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 11:08:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 4.74"
[Mon Aug 20 11:08:07 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.187
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.74"
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3.csv
[Mon Aug 20 16:17:12 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 20 16:17:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3.csv
[Mon Aug 20 16:17:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:14 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 20 16:17:14 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 20 16:17:14 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 20 16:18:37 2012] Spatial fit model total counts = 1944.250000, observed total counts = 1946.000000
[Mon Aug 20 16:18:37 2012] Offset between fit and detection position for source 4 = 0.002143 pixels
[Mon Aug 20 16:18:37 2012] 1921.881000 total counts/ 901.511000 bgd. counts: snr = 33.983818
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.002143 pixels
  Position = (325.0, 347.2) = 16 54 3.76 -41 47 30.1
  Extent = 4.7 (4.5-5.0)", rotation angle = 0
  Source counts = 1020.4 +/- 43.8
  Background counts = 901.5
  Rate = 0.03 +/- 0.001
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:49 2012] Counts = 1020.370000, rescaling region sizes by 2.000000
[Tue Aug 21 02:32:49 2012] XMMSAS src. selection expression = ellipse(28228.090560, 30158.984800, 568.602016, 568.602016, 0.000000, X, Y)
[Tue Aug 21 02:32:49 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4_src.reg
[Tue Aug 21 02:32:49 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (292, 315) - (358, 380)
[Tue Aug 21 02:32:49 2012] XMMSAS bgd. selection expression = annulus(28228.090560, 30158.984800, 1895.340055, 3790.680109, X, Y) && !ellipse(26792.731079, 27765.308136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28613.830400, 29088.475400, 408.891212, 408.891212, 0.000000, X, Y) && !ellipse(24598.236000, 26956.865200, 373.905611, 373.905611, 0.000000, X, Y) && !ellipse(25859.464200, 26930.568400, 542.228816, 542.228816, 0.000000, X, Y) && !ellipse(24566.189800, 28315.550800, 854.392025, 395.913611, 71.634400, X, Y) && !ellipse(26089.087250, 33022.481201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29026.043488, 29959.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.064200, 29448.035800, 415.973612, 415.973612, 0.000000, X, Y) && !ellipse(27539.094330, 25824.487030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27276.267670, 30178.450989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.262939, 27698.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.920000, 30500.318000, 1368.680039, 1368.680039, 0.000000, X, Y) && !ellipse(26675.601807, 29794.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29585.715400, 31628.575600, 426.543212, 349.690410, 359.975000, X, Y) && !ellipse(30868.268200, 26477.238220, 417.176012, 417.176012, 0.000000, X, Y) && !ellipse(27447.105530, 30655.365936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31356.690324, 33954.639000, 571.297616, 571.297616, 0.000000, X, Y) && !ellipse(26481.747498, 27105.488220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.505096, 31391.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.685425, 29089.989868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.348511, 28804.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28722.296600, 27292.492800, 205.284806, 205.284806, 0.000000, X, Y) && !ellipse(24807.926758, 29118.921722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.344452, 30365.354431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.447479, 31764.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.474000, 28152.881800, 1460.160042, 1460.160042, 0.000000, X, Y) && !ellipse(25109.128000, 25697.050000, 1056.904030, 1056.904030, 0.000000, X, Y) && !ellipse(23976.923828, 28475.693085, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:49 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4.gif
[Tue Aug 21 02:37:57 2012] Mean detx,y = (-1616.86, 2283.93) 
[Tue Aug 21 02:37:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 02:38:14 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 02:38:14 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 21 02:38:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 21 05:13:02 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:02 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 21 05:13:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:06 2012] Using photon index=1.80, rate=0.0297, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src4.arf
[Tue Aug 21 05:13:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:06 2012] Updating source flux to 4.3e-13