[Sun Aug 19 08:38:43 2012] Detection parameters:
  Position = (337.9, 419.7) = 16 53 58.76 -41 42 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 9.9
  Background counts = 16.1
  Rate = 0.002 +/- 0.0005

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 9.24'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun Aug 19 19:33:19 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 11.05"
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77.ximg exists
[Mon Aug 20 00:53:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77.csv
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Aug 20 00:53:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77.csv
[Mon Aug 20 00:53:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Aug 20 00:53:45 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Mon Aug 20 00:55:24 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.936289 pixels away
[Mon Aug 20 00:55:25 2012] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.669249 pixels away
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 11:08:07 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Mon Aug 20 11:08:07 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 11.05"
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73.csv
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73_1.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73.csv
[Mon Aug 20 16:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Mon Aug 20 16:17:16 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Mon Aug 20 16:18:37 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 24.054224 pixels away
[Mon Aug 20 16:18:37 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 39.586703 pixels away
[Mon Aug 20 16:18:37 2012] Spatial fit model total counts = 208.112000, observed total counts = 208.000000
[Mon Aug 20 16:18:37 2012] Offset between fit and detection position for source 19 = 2.025244 pixels
[Mon Aug 20 16:18:37 2012] 204.905500 total counts/ 147.255000 bgd. counts: snr = 4.750814
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.025244 pixels
  Position = (339.9, 420.0) = 16 53 57.99 -41 42 13.3
  Extent = 9.2 (6.5-13.3)", rotation angle = 0
  Source counts = 57.7 +/- 14.3
  Background counts = 147.3
  Rate = 0.002 +/- 0.0004
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:52 2012] XMMSAS src. selection expression = ellipse(29523.193000, 36495.007400, 554.319616, 554.319616, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19_src.reg
[Tue Aug 21 02:32:52 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (308, 388) - (372, 452)
[Tue Aug 21 02:32:52 2012] XMMSAS bgd. selection expression = annulus(29523.193000, 36495.007400, 923.866027, 1847.732053, X, Y) && !ellipse(29022.358020, 35697.411600, 488.856814, 488.856814, 0.000000, X, Y) && !ellipse(31684.516357, 38998.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28614.613400, 34825.050800, 367.856811, 305.069609, 95.505051, X, Y) && !ellipse(32017.207458, 36772.834869, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19.gif
[Tue Aug 21 03:06:40 2012] Mean detx,y = (-3686.21, 8450.39) 
[Tue Aug 21 03:06:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 03:07:02 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 03:07:02 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 03:07:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Aug 21 04:58:38 2012] Not generating rmf since there are only 57 counts
[Tue Aug 21 04:58:38 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:05 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:05 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 05:13:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:09 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src19.arf
[Tue Aug 21 05:13:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:09 2012] Updating source flux to 3.6e-14
[Tue Aug 21 05:20:13 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting