[Sun Aug 19 08:38:45 2012] Detection parameters:
  Position = (344.5, 222.2) = 16 53 56.15 -41 56 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.7 +/- 10.1
  Background counts = 14.4
  Rate = 0.002 +/- 0.0004

[Sun Aug 19 08:38:45 2012] Off-axis axis estimate = 6.46'
[Sun Aug 19 19:33:19 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:33:19 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Sun Aug 19 19:33:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.912
[Sun Aug 19 19:33:19 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.66"
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73.ximg exists
[Mon Aug 20 00:53:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73.csv
[Mon Aug 20 00:53:43 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Aug 20 00:53:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73.csv
[Mon Aug 20 00:53:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Aug 20 00:53:45 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Aug 20 00:53:45 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Aug 20 00:55:24 2012] Spatial fit model total counts = 221.993000, observed total counts = 221.000000
[Mon Aug 20 00:55:24 2012] Offset between fit and detection position for source 102 = 1.044642 pixels
[Mon Aug 20 00:55:24 2012] 220.079700 total counts/ 164.870000 bgd. counts: snr = 4.299763
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.044642 pixels
  Position = (345.3, 221.5) = 16 53 55.84 -41 56 36.9
  Extent = 8.7 (4.8-13.0)", rotation angle = 0
  Source counts = 55.2 +/- 14.8
  Background counts = 164.9
  Rate = 0.002 +/- 0.0004
[Mon Aug 20 00:55:25 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:55:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:55:25 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 00:55:25 2012] Source does appear to be extended
[Mon Aug 20 00:55:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 11:08:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 11:08:07 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Aug 20 11:08:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Mon Aug 20 11:08:07 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 8.70"
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70.csv
[Mon Aug 20 16:17:13 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon Aug 20 16:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70.csv
[Mon Aug 20 16:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon Aug 20 16:17:16 2012] fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon Aug 20 16:17:16 2012] Fit fullrun_mos2_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Mon Aug 20 16:18:37 2012] Warning, spatial fit 70 centroid is now closest to src. 104
[Mon Aug 20 16:18:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:38 2012] Source does appear to be extended
[Mon Aug 20 16:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 02:32:52 2012] XMMSAS src. selection expression = ellipse(29990.359000, 19222.352200, 521.763615, 521.763615, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing source region out to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102_src.reg
[Tue Aug 21 02:32:52 2012] Extracting stamp from image fullrun_mos2_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (315, 192) - (375, 251)
[Tue Aug 21 02:32:52 2012] XMMSAS bgd. selection expression = annulus(29990.359000, 19222.352200, 869.606025, 1739.212050, X, Y) && !ellipse(31004.675060, 18198.026200, 485.806414, 485.806414, 0.000000, X, Y) && !ellipse(27714.026245, 18651.018692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29931.178200, 20182.254000, 628.060818, 628.060818, 0.000000, X, Y)
[Tue Aug 21 02:32:52 2012] Writing fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102.gif
[Tue Aug 21 03:05:29 2012] Mean detx,y = (-2020.81, -8763.61) 
[Tue Aug 21 03:05:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 03:05:48 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 03:05:48 2012] Setting source spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Aug 21 03:05:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Tue Aug 21 04:58:21 2012] Not generating rmf since there are only 55 counts
[Tue Aug 21 04:58:21 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:13:05 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:13:05 2012] Error reading totcts from fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Aug 21 05:13:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:09 2012] Using photon index=1.80, rate=0.00161, arf fullrun_mos2_xmm0109490301_pi300-10000_pass1_cl_src102.arf
[Tue Aug 21 05:13:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:09 2012] Updating source flux to 2.9e-14
[Tue Aug 21 05:20:13 2012] Source 102 has fewer than 100.000000 counts, skipping spectral fitting