[Sun Aug 19 08:37:55 2012] Detection parameters:
  Position = (315.4, 313.2) = 16 54 7.48 -41 50 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.6 +/- 15.3
  Background counts = 44.1
  Rate = 0.002 +/- 0.0005

[Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 1.63'
[Sun Aug 19 13:28:00 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Aug 19 13:28:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066
[Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 7.24"
[Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src74.ximg exists
[Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src74_1.ximg exists
[Sun Aug 19 19:33:16 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src74 appears to have run properly
[Sun Aug 19 19:33:18 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sun Aug 19 19:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sun Aug 19 19:33:18 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sun Aug 19 19:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sun Aug 19 19:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:54 2012] Warning, spatial fit 74 centroid is now closest to src. 1
[Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:54 2012] Assessing source extent using major
[Mon Aug 20 00:54:54 2012] Source does appear to be extended
[Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:34:04 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Aug 20 06:34:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066
[Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 7.24"
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69.ximg exists
[Mon Aug 20 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69.csv
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69_1.ximg exists
[Mon Aug 20 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69.csv
[Mon Aug 20 11:08:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Mon Aug 20 11:08:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Mon Aug 20 11:08:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Mon Aug 20 11:08:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:18:09 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 18.756637 pixels away
[Mon Aug 20 16:18:09 2012] Warning, spatial fit 69 centroid is now closest to src. 1
[Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:10 2012] Assessing source extent using major
[Mon Aug 20 16:18:10 2012] Source does appear to be extended
[Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:03:21 2012] XMMSAS src. selection expression = ellipse(27395.051025, 27196.927429, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 00:03:21 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81_src.reg
[Tue Aug 21 00:03:21 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (278, 276) - (353, 351)
[Tue Aug 21 00:03:21 2012] XMMSAS bgd. selection expression = annulus(27395.051025, 27196.927429, 1087.500000, 2175.000000, X, Y) && !ellipse(26779.335800, 27749.280800, 432.527212, 432.527212, 0.000000, X, Y) && !ellipse(28621.981400, 29088.018200, 389.017611, 389.017611, 0.000000, X, Y) && !ellipse(26436.072200, 25988.652800, 393.840811, 393.840811, 0.000000, X, Y) && !ellipse(25889.904297, 26928.835846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.686000, 26497.473000, 238.176007, 238.176007, 0.000000, X, Y) && !ellipse(29117.108337, 29589.353088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27087.184448, 24937.609009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.560608, 27023.989441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27540.044120, 25810.767200, 372.328811, 372.328811, 0.000000, X, Y) && !ellipse(25775.544000, 27888.674000, 1197.648034, 1197.648034, 0.000000, X, Y) && !ellipse(27569.399200, 29070.903600, 651.604019, 651.604019, 0.000000, X, Y) && !ellipse(26714.432800, 28801.800600, 334.819210, 334.819210, 0.000000, X, Y) && !ellipse(25219.814728, 25561.575409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28714.826200, 27275.636400, 329.344009, 329.344009, 0.000000, X, Y) && !ellipse(26245.394135, 24230.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.979950, 24418.064911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24976.374000, 28366.990000, 1150.984033, 1150.984033, 0.000000, X, Y) && !ellipse(29100.304657, 28289.264893, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 00:03:21 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81.gif
[Tue Aug 21 00:33:02 2012] Mean detx,y = (-171.20, 101.82) 
[Tue Aug 21 00:33:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:33:17 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:33:18 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Tue Aug 21 00:33:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Tue Aug 21 02:29:14 2012] Not generating rmf since there are only 67 counts
[Tue Aug 21 02:29:14 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:56 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:57 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Tue Aug 21 05:13:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:00 2012] Using photon index=1.80, rate=0.00199, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src81.arf
[Tue Aug 21 05:13:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:00 2012] Updating source flux to 2.3e-14
[Tue Aug 21 05:13:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting