[Sun Aug 19 08:37:55 2012] Detection parameters:
  Position = (370.5, 391.5) = 16 53 46.11 -41 44 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 9.6
  Background counts = 16.8
  Rate = 0.002 +/- 0.0004

[Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 8.53'
[Sun Aug 19 13:28:00 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Aug 19 13:28:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.857
[Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 10.69"
[Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81.ximg exists
[Sun Aug 19 19:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81.csv
[Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Aug 19 19:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81.csv
[Sun Aug 19 19:33:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:33:18 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Aug 19 19:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Aug 19 19:33:18 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Aug 19 19:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Aug 19 19:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:54 2012] Source 56 is offset by -0.186129 and 9.124584 pixels which is larger than
2 X fitted extent = 1.206189 x 1.206189, not incorporating fit results
[Mon Aug 20 00:54:54 2012] Spatial fit model total counts = 194.686000, observed total counts = 164.000000
[Mon Aug 20 00:54:54 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:54 2012] Assessing source extent using major
[Mon Aug 20 00:54:54 2012] Source does appear to be extended
[Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:34:04 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Mon Aug 20 06:34:04 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.857
[Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 10.69"
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75.ximg exists
[Mon Aug 20 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75.csv
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75_1.ximg exists
[Mon Aug 20 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75.csv
[Mon Aug 20 11:08:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Mon Aug 20 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Aug 20 11:08:07 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Mon Aug 20 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Aug 20 11:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:18:09 2012] Spatial fit model total counts = 192.582000, observed total counts = 164.000000
[Mon Aug 20 16:18:09 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:10 2012] Assessing source extent using major
[Mon Aug 20 16:18:10 2012] Source does appear to be extended
[Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:03:22 2012] XMMSAS src. selection expression = ellipse(32180.860809, 34009.830841, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 00:03:22 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56_src.reg
[Tue Aug 21 00:03:22 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (333, 354) - (408, 429)
[Tue Aug 21 00:03:22 2012] XMMSAS bgd. selection expression = annulus(32180.860809, 34009.830841, 1087.500000, 2175.000000, X, Y) && !ellipse(34770.991680, 33854.545800, 486.556814, 324.404809, 57.394507, X, Y) && !ellipse(34305.643585, 36152.086365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31423.342000, 31532.896600, 558.421616, 558.421616, 0.000000, X, Y)
[Tue Aug 21 00:03:22 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56.gif
[Tue Aug 21 00:35:27 2012] Mean detx,y = (5859.39, 5805.78) 
[Tue Aug 21 00:35:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:36:03 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:36:04 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Aug 21 00:36:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Tue Aug 21 02:30:15 2012] Not generating rmf since there are only 43 counts
[Tue Aug 21 02:30:15 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:57 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:57 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Aug 21 05:13:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:13:01 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src56.arf
[Tue Aug 21 05:13:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:13:01 2012] Updating source flux to 3e-14
[Tue Aug 21 05:13:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting