[Sun Aug 19 08:37:55 2012] Detection parameters: Position = (300.3, 305.2) = 16 54 13.39 -41 50 32.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 322.1 +/- 25.7 Background counts = 42.9 Rate = 0.01 +/- 0.0008 [Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 0.51' [Sun Aug 19 13:28:00 2012] Using EEF radius (= 6.68 ")to estimate initial spatial extent for simple fitting [Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 6.68" [Sun Aug 19 13:28:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965 [Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.68" [Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11.ximg exists [Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11.csv [Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11_1.ximg exists [Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11.csv [Sun Aug 19 19:33:15 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Sun Aug 19 19:33:16 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Sun Aug 19 19:33:16 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Mon Aug 20 00:54:53 2012] Source 32 is offset by -4.105618 and 5.316813 pixels which is larger than 2 X fitted extent = 2.332156 x 2.332156, not incorporating fit results [Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000 [Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 20 00:54:54 2012] Assessing source extent using major [Mon Aug 20 00:54:54 2012] Source does appear to be extended [Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 20 00:54:54 2012] Source is confused with source 3 [Mon Aug 20 06:34:04 2012] Using EEF radius (= 6.68 ")to estimate initial spatial extent for simple fitting [Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 6.68" [Mon Aug 20 06:34:04 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965 [Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.68" [Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11.ximg exists [Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11.csv [Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11_1.ximg exists [Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11.csv [Mon Aug 20 11:08:04 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Mon Aug 20 11:08:05 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Mon Aug 20 16:18:09 2012] Spatial fit model total counts = 1855.260000, observed total counts = 1854.000000 [Mon Aug 20 16:18:09 2012] Offset between fit and detection position for source 32 = 0.086666 pixels [Mon Aug 20 16:18:09 2012] Warning, changing simple spatial fit ID from 11 to 6 [Mon Aug 20 16:18:09 2012] 1917.653300 total counts/ 1824.880000 bgd. counts: snr = 2.171730 Spatial fit parameters: Offset between fit and detection position for source 32 = 0.086666 pixels Position = (300.2, 305.2) = 16 54 13.43 -41 50 33.0 Extent = 2.6 (1.7-3.5)" x 2.5 (1.8-3.3)", rotation angle = 90 (27-90) degrees Source counts = 92.8 +/- 43.8 Background counts = 1824.9 Rate = 0.003 +/- 0.001 [Mon Aug 20 16:18:09 2012] Spatial fit model total counts = 2348.040000, observed total counts = 2346.000000 [Mon Aug 20 16:18:09 2012] Offset between fit and detection position for source 32 = 0.074631 pixels [Mon Aug 20 16:18:09 2012] Warning, changing simple spatial fit ID from 6 to 11 [Mon Aug 20 16:18:09 2012] 1567.274000 total counts/ 1447.250000 bgd. counts: snr = 3.154978 Spatial fit parameters: Offset between fit and detection position for source 32 = 0.074631 pixels Position = (300.2, 305.1) = 16 54 13.40 -41 50 33.2 Extent = 3.0 (2.6-3.7)", rotation angle = 0 Source counts = 120.0 +/- 39.6 Background counts = 1447.2 Rate = 0.003 +/- 0.001 [Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000 [Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 20 16:18:10 2012] Assessing source extent using major axis lower bound [Mon Aug 20 16:18:10 2012] Source does appear to be extended [Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 21 00:03:20 2012] XMMSAS src. selection expression = ellipse(26071.686000, 26497.473000, 178.632005, 178.632005, 0.000000, X, Y) [Tue Aug 21 00:03:20 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32_src.reg [Tue Aug 21 00:03:20 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (290, 295) - (310, 315) [Tue Aug 21 00:03:20 2012] XMMSAS bgd. selection expression = annulus(26071.686000, 26497.473000, 297.720009, 595.440017, X, Y) && !ellipse(26436.072200, 25988.652800, 393.840811, 393.840811, 0.000000, X, Y) && !ellipse(25889.904297, 26928.835846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.560608, 27023.989441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25775.544000, 27888.674000, 1197.648034, 1197.648034, 0.000000, X, Y) && !ellipse(25219.814728, 25561.575409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27395.051025, 27196.927429, 870.000000, 870.000000, 0.000000, X, Y) [Tue Aug 21 00:03:20 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32.gif [Tue Aug 21 00:07:42 2012] Mean detx,y = (-849.66, -1135.32) [Tue Aug 21 00:07:44 2012] Setting backscal keywords in source and bgd. spectrum [Tue Aug 21 00:07:56 2012] Binned source spectrum to 10 counts/bin [Tue Aug 21 00:07:57 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Tue Aug 21 00:07:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32_bgd.pi.gz [Tue Aug 21 05:12:53 2012] Updating aperture counts using extracted products [Tue Aug 21 05:12:53 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Tue Aug 21 05:12:58 2012] Calculating source flux in energy range 0.30-8.00 [Tue Aug 21 05:12:58 2012] Using photon index=1.80, rate=0.00349, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src32.arf [Tue Aug 21 05:12:58 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Aug 21 05:12:58 2012] Updating source flux to 6.8e-14 [Tue Aug 21 05:13:16 2012] Flag b found in src. 32 procflags, skipping spectral fitting [Tue Aug 21 05:13:16 2012] Flag c found in src. 32 procflags, skipping spectral fitting