[Sun Aug 19 08:37:54 2012] Detection parameters:
  Position = (273.0, 309.0) = 16 54 24.02 -41 50 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.2 +/- 21.4
  Background counts = 35.8
  Rate = 0.007 +/- 0.0007

[Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 2.00'
[Sun Aug 19 13:28:00 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Sun Aug 19 13:28:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.43"
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21.csv
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21.csv
[Sun Aug 19 19:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 19 19:33:17 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Aug 20 00:54:54 2012] Warning, spatial fit 21 centroid is now closest to src. 27
[Mon Aug 20 00:54:54 2012] Spatial fit model total counts = 624.518000, observed total counts = 628.000000
[Mon Aug 20 00:54:54 2012] Offset between fit and detection position for source 31 = 7.151755 pixels
[Mon Aug 20 00:54:54 2012] Warning, changing simple spatial fit ID from 21 to 67
[Mon Aug 20 00:54:54 2012] 538.972000 total counts/ 338.187000 bgd. counts: snr = 10.918244
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 7.151755 pixels
  Position = (266.4, 306.2) = 16 54 26.58 -41 50 28.3
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 200.8 +/- 23.2
  Background counts = 338.2
  Rate = 0.006 +/- 0.0007
[Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:54 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 00:54:54 2012] Source does appear to be extended
[Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:54:54 2012] Source is confused with source 27
[Mon Aug 20 06:34:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:34:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 15.64"
[Mon Aug 20 06:34:04 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.954
[Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 15.64"
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21.ximg exists
[Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21.csv
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21.csv
[Mon Aug 20 11:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Aug 20 11:08:05 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Aug 20 11:08:06 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Aug 20 16:18:09 2012] Warning, spatial fit 21 centroid is now closest to src. 82
[Mon Aug 20 16:18:09 2012] Source 31 is offset by -1.731241 and -7.464575 pixels which is larger than
2 X fitted extent = 1.810156 x 1.810156, not incorporating fit results
[Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:10 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:10 2012] Source does appear to be extended
[Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:03:20 2012] XMMSAS src. selection expression = ellipse(23125.346000, 26594.232000, 938.562027, 938.562027, 0.000000, X, Y)
[Tue Aug 21 00:03:20 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31_src.reg
[Tue Aug 21 00:03:20 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (212, 252) - (320, 360)
[Tue Aug 21 00:03:20 2012] XMMSAS bgd. selection expression = annulus(23125.346000, 26594.232000, 1564.270045, 3128.540090, X, Y) && !ellipse(26436.072200, 25988.652800, 393.840811, 393.840811, 0.000000, X, Y) && !ellipse(24595.376400, 26964.032200, 350.066410, 350.066410, 0.000000, X, Y) && !ellipse(25889.904297, 26928.835846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21928.992000, 25811.290000, 334.468810, 334.468810, 0.000000, X, Y) && !ellipse(23212.750800, 27249.128200, 386.404011, 304.073609, 34.513500, X, Y) && !ellipse(26071.686000, 26497.473000, 238.176007, 238.176007, 0.000000, X, Y) && !ellipse(21882.484120, 29179.789200, 406.745612, 406.745612, 0.000000, X, Y) && !ellipse(19553.169769, 27171.542694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.762000, 28470.722000, 567.784016, 567.784016, 0.000000, X, Y) && !ellipse(24114.506400, 29469.536200, 432.420012, 432.420012, 0.000000, X, Y) && !ellipse(23429.228420, 24517.372800, 442.896013, 364.480810, 83.210624, X, Y) && !ellipse(27087.184448, 24937.609009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23398.734400, 28152.831600, 247.382407, 247.382407, 0.000000, X, Y) && !ellipse(26435.560608, 27023.989441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25775.544000, 27888.674000, 1197.648034, 1197.648034, 0.000000, X, Y) && !ellipse(25084.639221, 23982.536560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19575.198547, 27790.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25219.814728, 25561.575409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.394135, 24230.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21945.792000, 25809.992000, 355.832810, 355.832810, 0.000000, X, Y) && !ellipse(23899.466003, 27537.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25880.860820, 23436.007500, 657.112019, 657.112019, 0.000000, X, Y) && !ellipse(24976.374000, 28366.990000, 1150.984033, 1150.984033, 0.000000, X, Y)
[Tue Aug 21 00:03:20 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31.gif
[Tue Aug 21 00:11:25 2012] Mean detx,y = (-151.13, -3900.66) 
[Tue Aug 21 00:11:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:11:52 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:11:52 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Aug 21 00:11:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Aug 21 05:12:53 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:54 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Aug 21 05:12:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:58 2012] Using photon index=1.80, rate=0.00585, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src31.arf
[Tue Aug 21 05:12:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:58 2012] Updating source flux to 7.5e-14
[Tue Aug 21 05:13:16 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Tue Aug 21 05:13:16 2012] Flag c found in src. 31 procflags, skipping spectral fitting