[Sun Aug 19 08:37:54 2012] Detection parameters:
  Position = (294.1, 319.1) = 16 54 15.80 -41 49 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.4 +/- 18.6
  Background counts = 41.8
  Rate = 0.005 +/- 0.0006

[Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 1.53'
[Sun Aug 19 13:28:00 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sun Aug 19 13:28:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.19"
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38.csv
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38.csv
[Sun Aug 19 19:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Aug 19 19:33:17 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Mon Aug 20 00:54:54 2012] Source 25 is offset by -6.084718 and 1.451546 pixels which is larger than
2 X fitted extent = 2.748327 x 2.748327, not incorporating fit results
[Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:54 2012] Assessing source extent using major
[Mon Aug 20 00:54:54 2012] Source does appear to be extended
[Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:34:04 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Mon Aug 20 06:34:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 7.19"
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38.ximg exists
[Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38.csv
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon Aug 20 11:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38.csv
[Mon Aug 20 11:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Aug 20 11:08:06 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Aug 20 16:18:09 2012] Warning, spatial fit 38 centroid is now closest to src. 75
[Mon Aug 20 16:18:09 2012] Spatial fit model total counts = 758.903000, observed total counts = 767.000000
[Mon Aug 20 16:18:09 2012] Offset between fit and detection position for source 25 = 3.437572 pixels
[Mon Aug 20 16:18:09 2012] Warning, changing simple spatial fit ID from 38 to 76
[Mon Aug 20 16:18:09 2012] 713.829000 total counts/ 582.210000 bgd. counts: snr = 5.454799
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.437572 pixels
  Position = (296.8, 321.1) = 16 54 14.73 -41 49 23.6
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 131.6 +/- 26.7
  Background counts = 582.2
  Rate = 0.004 +/- 0.0008
[Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:10 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 16:18:10 2012] Source does appear to be extended
[Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:03:21 2012] XMMSAS src. selection expression = ellipse(25775.544000, 27888.674000, 898.236026, 898.236026, 0.000000, X, Y)
[Tue Aug 21 00:03:21 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25_src.reg
[Tue Aug 21 00:03:21 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (245, 269) - (348, 373)
[Tue Aug 21 00:03:21 2012] XMMSAS bgd. selection expression = annulus(25775.544000, 27888.674000, 1497.060043, 2994.120086, X, Y) && !ellipse(26779.335800, 27749.280800, 432.527212, 432.527212, 0.000000, X, Y) && !ellipse(28621.981400, 29088.018200, 389.017611, 389.017611, 0.000000, X, Y) && !ellipse(28235.918000, 30153.228200, 391.177611, 391.177611, 0.000000, X, Y) && !ellipse(26436.072200, 25988.652800, 393.840811, 393.840811, 0.000000, X, Y) && !ellipse(24595.376400, 26964.032200, 350.066410, 350.066410, 0.000000, X, Y) && !ellipse(25889.904297, 26928.835846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23212.750800, 27249.128200, 386.404011, 304.073609, 34.513500, X, Y) && !ellipse(26071.686000, 26497.473000, 238.176007, 238.176007, 0.000000, X, Y) && !ellipse(24565.762000, 28470.722000, 567.784016, 567.784016, 0.000000, X, Y) && !ellipse(24114.506400, 29469.536200, 432.420012, 432.420012, 0.000000, X, Y) && !ellipse(23125.346000, 26594.232000, 1251.416036, 1251.416036, 0.000000, X, Y) && !ellipse(23429.228420, 24517.372800, 442.896013, 364.480810, 83.210624, X, Y) && !ellipse(29020.464780, 29956.097200, 278.131208, 278.131208, 0.000000, X, Y) && !ellipse(29117.108337, 29589.353088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27087.184448, 24937.609009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23398.734400, 28152.831600, 247.382407, 247.382407, 0.000000, X, Y) && !ellipse(26435.560608, 27023.989441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27540.044120, 25810.767200, 372.328811, 372.328811, 0.000000, X, Y) && !ellipse(27569.399200, 29070.903600, 651.604019, 651.604019, 0.000000, X, Y) && !ellipse(26714.432800, 28801.800600, 334.819210, 334.819210, 0.000000, X, Y) && !ellipse(27295.089600, 30106.631200, 278.132808, 278.132808, 0.000000, X, Y) && !ellipse(25219.814728, 25561.575409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26647.460300, 29820.166800, 201.648806, 201.648806, 0.000000, X, Y) && !ellipse(27465.433197, 30642.624451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28714.826200, 27275.636400, 329.344009, 329.344009, 0.000000, X, Y) && !ellipse(26245.394135, 24230.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27395.051025, 27196.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23899.466003, 27537.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24976.374000, 28366.990000, 1150.984033, 1150.984033, 0.000000, X, Y) && !ellipse(29100.304657, 28289.264893, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 00:03:21 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25.gif
[Tue Aug 21 00:17:49 2012] Mean detx,y = (388.96, -994.34) 
[Tue Aug 21 00:17:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:18:02 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:18:03 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Aug 21 00:18:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Aug 21 05:12:55 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:55 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Aug 21 05:12:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:59 2012] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src25.arf
[Tue Aug 21 05:12:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:59 2012] Updating source flux to 4.4e-14
[Tue Aug 21 05:13:16 2012] Flag b found in src. 25 procflags, skipping spectral fitting