[Sun Aug 19 08:37:54 2012] Detection parameters:
  Position = (335.2, 340.7) = 16 53 59.78 -41 48 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.6 +/- 19.1
  Background counts = 30.2
  Rate = 0.006 +/- 0.0007

[Sun Aug 19 08:37:56 2012] Off-axis axis estimate = 4.06'
[Sun Aug 19 13:28:00 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:28:00 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Aug 19 13:28:00 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.627
[Sun Aug 19 13:28:00 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.46"
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24.csv
[Sun Aug 19 19:33:15 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Aug 19 19:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24.csv
[Sun Aug 19 19:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Aug 19 19:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Aug 19 19:33:17 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Aug 19 19:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Aug 19 19:33:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 00:54:53 2012] Source 19 is offset by 2.473544 and 0.428311 pixels which is larger than
2 X fitted extent = 0.970418 x 0.970418, not incorporating fit results
[Mon Aug 20 00:54:54 2012] Warning, spatial fit 24 centroid is now closest to src. 2
[Mon Aug 20 00:54:54 2012] Source 19 is offset by 5.606257 and 4.746219 pixels which is larger than
2 X fitted extent = 2.337628 x 3.260598, not incorporating fit results
[Mon Aug 20 00:54:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 00:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 00:54:54 2012] Assessing source extent using major
[Mon Aug 20 00:54:54 2012] Source does appear to be extended
[Mon Aug 20 00:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 00:54:54 2012] Source is confused with source 18
[Mon Aug 20 06:34:04 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:34:04 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Mon Aug 20 06:34:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.627
[Mon Aug 20 06:34:04 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.46"
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src24.ximg exists
[Mon Aug 20 11:08:04 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Aug 20 11:08:04 2012] Fit fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_src24 appears to have run properly
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Aug 20 11:08:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Aug 20 11:08:06 2012] fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Aug 20 11:08:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Aug 20 11:08:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:18:09 2012] Source 19 is offset by 4.433797 and -2.138102 pixels which is larger than
2 X fitted extent = 0.399614 x 0.399614, not incorporating fit results
[Mon Aug 20 16:18:09 2012] Source 19 is offset by 5.663038 and 5.771093 pixels which is larger than
2 X fitted extent = 1.966428 x 1.906037, not incorporating fit results
[Mon Aug 20 16:18:09 2012] Source 19 is offset by 5.611176 and 6.231760 pixels which is larger than
2 X fitted extent = 2.297343 x 2.297343, not incorporating fit results
[Mon Aug 20 16:18:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 16:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 16:18:10 2012] Assessing source extent using major
[Mon Aug 20 16:18:10 2012] Source does appear to be extended
[Mon Aug 20 16:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:03:20 2012] XMMSAS src. selection expression = ellipse(29117.108337, 29589.353088, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 00:03:20 2012] Writing source region out to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19_src.reg
[Tue Aug 21 00:03:20 2012] Extracting stamp from image fullrun_mos1_xmm0109490301_pi300-10000_cl_sm2.00.img.gz, (298, 303) - (373, 378)
[Tue Aug 21 00:03:20 2012] XMMSAS bgd. selection expression = annulus(29117.108337, 29589.353088, 1087.500000, 2175.000000, X, Y) && !ellipse(26779.335800, 27749.280800, 432.527212, 432.527212, 0.000000, X, Y) && !ellipse(28621.981400, 29088.018200, 389.017611, 389.017611, 0.000000, X, Y) && !ellipse(28235.918000, 30153.228200, 391.177611, 391.177611, 0.000000, X, Y) && !ellipse(29020.464780, 29956.097200, 278.131208, 278.131208, 0.000000, X, Y) && !ellipse(26435.560608, 27023.989441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.485400, 31153.283400, 291.400008, 291.400008, 0.000000, X, Y) && !ellipse(25775.544000, 27888.674000, 1197.648034, 1197.648034, 0.000000, X, Y) && !ellipse(27569.399200, 29070.903600, 651.604019, 651.604019, 0.000000, X, Y) && !ellipse(26714.432800, 28801.800600, 334.819210, 334.819210, 0.000000, X, Y) && !ellipse(27295.089600, 30106.631200, 278.132808, 278.132808, 0.000000, X, Y) && !ellipse(27465.433197, 30642.624451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28714.826200, 27275.636400, 329.344009, 329.344009, 0.000000, X, Y) && !ellipse(30443.202545, 30003.115509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27395.051025, 27196.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31423.342000, 31532.896600, 558.421616, 558.421616, 0.000000, X, Y) && !ellipse(29100.304657, 28289.264893, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 00:03:20 2012] Writing fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19.gif
[Tue Aug 21 00:12:41 2012] Mean detx,y = (1720.59, 2059.60) 
[Tue Aug 21 00:12:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:12:54 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:12:54 2012] Setting source spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 00:12:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Aug 21 01:56:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 01:56:55 2012] rmf not generated due to insufficient counts
[Tue Aug 21 05:12:54 2012] Updating aperture counts using extracted products
[Tue Aug 21 05:12:54 2012] Error reading totcts from fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 05:12:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 05:12:58 2012] Using photon index=1.80, rate=0.00612, arf fullrun_mos1_xmm0109490301_pi300-10000_pass1_cl_src19.arf
[Tue Aug 21 05:12:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 05:12:58 2012] Updating source flux to 9.7e-14
[Tue Aug 21 05:13:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting