[Sun Sep  2 18:27:28 2012] Detection parameters:
  Position = (319.7, 449.0) = 16 54 5.96 -41 40 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.2 +/- 14.7
  Background counts = 37.7
  Rate = 0.003 +/- 0.0005

[Sun Sep  2 18:27:31 2012] Off-axis axis estimate = 11.03'
[Sun Sep  2 18:31:34 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:31:34 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Sun Sep  2 18:31:34 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.997
[Sun Sep  2 18:31:34 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 11.94"
[Sun Sep  2 21:54:26 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src38.ximg exists
[Sun Sep  2 21:54:26 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Sep  2 21:54:26 2012] Fit fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src38 appears to have run properly
[Sun Sep  2 21:54:28 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Sep  2 21:54:28 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Sep  2 21:54:28 2012] Fit fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Mon Sep  3 03:49:21 2012] Spatial fit model total counts = 1571.930000, observed total counts = 1559.000000
[Mon Sep  3 03:49:21 2012] Offset between fit and detection position for source 43 = 2.285668 pixels
[Mon Sep  3 03:49:21 2012] Warning, changing simple spatial fit ID from 38 to 37
[Mon Sep  3 03:49:21 2012] 1487.934520 total counts/ 1.254520 bgd. counts: snr = 1327.329370
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.285668 pixels
  Position = (321.2, 447.3) = 16 54 5.36 -41 40 11.9
  Extent = 24.2 (24.2-48.4)", rotation angle = 0
  Source counts = 1486.7 +/- 38.6
  Background counts = 1.3
  Rate = 0.05 +/- 0.001
[Mon Sep  3 03:49:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 03:49:22 2012] Source does appear to be extended
[Mon Sep  3 03:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:49:22 2012] Source is confused with source 42
[Mon Sep  3 03:50:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:50:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 03:50:14 2012] Initial guess for spatial extent in simple fitting = 24.19"
[Mon Sep  3 03:50:14 2012] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.980
[Mon Sep  3 03:50:14 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 24.19"
[Mon Sep  3 06:42:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38.ximg exists
[Mon Sep  3 06:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38.csv
[Mon Sep  3 06:42:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon Sep  3 06:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38.csv
[Mon Sep  3 06:42:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Sep  3 06:42:31 2012] Fit fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Sep  3 11:19:01 2012] Warning, spatial fit 38 centroid is now closest to src. 5
[Mon Sep  3 11:19:01 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:01 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:01 2012] Source does appear to be extended
[Mon Sep  3 11:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 11:20:08 2012] Counts = 1486.680000, rescaling region sizes by 2.000000
[Mon Sep  3 11:20:08 2012] XMMSAS src. selection expression = ellipse(27897.902000, 38870.686000, 2902.920084, 2902.920084, 0.000000, X, Y)
[Mon Sep  3 11:20:08 2012] Writing source region out to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43_src.reg
[Mon Sep  3 11:20:08 2012] Extracting stamp from image fullrun_pn_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (154, 281) - (488, 595)
[Mon Sep  3 11:20:08 2012] XMMSAS bgd. selection expression = annulus(27897.902000, 38870.686000, 9676.400278, 19352.800557, X, Y) && !ellipse(26832.646620, 27702.488000, 1410.513641, 1410.513641, 0.000000, X, Y) && !ellipse(28694.196686, 29236.462524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.016527, 25954.700842, 426.446454, 413.101574, 216.574227, X, Y) && !ellipse(28282.442800, 30103.026400, 453.796813, 453.796813, 0.000000, X, Y) && !ellipse(26674.658000, 39950.404000, 496.056814, 496.056814, 0.000000, X, Y) && !ellipse(25413.008600, 38009.881000, 512.925615, 512.925615, 0.000000, X, Y) && !ellipse(29176.628784, 35630.049194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28664.619659, 34756.480835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34810.003571, 33788.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29712.450867, 31122.011230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12920.772507, 31269.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.664612, 29956.875519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39942.979675, 29539.531464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.540400, 29125.356000, 449.556013, 380.386411, 90.000000, X, Y) && !ellipse(23162.031616, 28515.930054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.686000, 27929.380000, 1191.088034, 1191.088034, 0.000000, X, Y) && !ellipse(23276.689056, 27200.278076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25927.960000, 26918.888000, 437.129613, 437.129613, 0.000000, X, Y) && !ellipse(23845.852997, 26683.813812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.635040, 26486.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28085.006600, 26506.820000, 481.679214, 457.820013, 91.051492, X, Y) && !ellipse(22524.005800, 26167.194400, 490.540814, 490.540814, 0.000000, X, Y) && !ellipse(27588.347200, 25776.006400, 371.544811, 371.544811, 0.000000, X, Y) && !ellipse(27313.828000, 24834.834600, 803.160023, 803.160023, 0.000000, X, Y) && !ellipse(29578.260376, 24319.337646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30062.734000, 23751.032000, 289.600008, 289.600008, 0.000000, X, Y) && !ellipse(21595.280243, 19265.804001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.722400, 40882.151000, 503.832014, 503.832014, 0.000000, X, Y) && !ellipse(27617.444244, 42723.225464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18291.607376, 42494.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33371.694550, 41778.125305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34480.694977, 41394.306305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33493.483398, 40486.334076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31550.371002, 40258.375916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.606000, 39320.758000, 1910.688055, 602.132017, 35.916000, X, Y) && !ellipse(21986.303665, 38410.345428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24011.771088, 38197.568726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34604.220215, 37401.126312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33974.041046, 37130.732819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19005.814240, 37085.111450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32071.231995, 36697.116089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29549.371002, 36404.614166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.698364, 36131.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.879242, 36157.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.568573, 36058.969177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15942.757385, 35194.234100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29823.760315, 34308.731384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38699.558000, 34022.869600, 520.588015, 520.588015, 0.000000, X, Y) && !ellipse(32330.864655, 33921.630768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20520.400925, 33709.297455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22333.232361, 33493.658630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20319.760361, 33298.492737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.385681, 33262.655151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.249329, 32801.707550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25305.208200, 32672.706000, 1458.272042, 972.584028, 313.083700, X, Y) && !ellipse(25258.684357, 32327.418427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.589020, 31582.945557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31461.464000, 31548.736600, 378.012811, 378.012811, 0.000000, X, Y) && !ellipse(28758.042860, 31690.956400, 539.776016, 270.643208, 227.578000, X, Y) && !ellipse(27274.738373, 31344.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21292.853821, 31247.663147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.279297, 31013.866577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.488037, 30887.880127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.705261, 30563.233765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.734000, 30329.682000, 518.305615, 518.305615, 0.000000, X, Y) && !ellipse(40282.990692, 29921.993744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23343.625000, 30017.816406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30471.677734, 29905.139618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.497780, 29917.686400, 402.359212, 402.359212, 0.000000, X, Y) && !ellipse(32272.268158, 29658.330750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25838.518860, 29747.359192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31755.809204, 29665.804657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26709.790619, 29728.487244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13137.023315, 29722.431122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.121246, 29789.117493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30376.059509, 29431.708069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.584991, 29169.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.050446, 29147.500458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22976.105225, 29197.136230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25193.314880, 28918.060791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31016.017151, 28605.362061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21235.065781, 28336.973114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19947.772171, 28253.660950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29181.344116, 28307.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.443024, 28222.570557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.990326, 27433.339203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.996033, 27246.231323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19610.961792, 27110.386749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.839600, 26790.328800, 269.588008, 269.588008, 0.000000, X, Y) && !ellipse(31346.924072, 26817.507812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24927.700439, 26912.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.181610, 26664.009949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32658.335968, 26356.626587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35892.459015, 26357.431061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.975922, 26417.599335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.209229, 26297.621216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14329.495209, 26053.600128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.251160, 25621.247192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.688324, 25430.533783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.816345, 25450.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.547180, 25533.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.214966, 25254.669952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32711.173706, 25061.930756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.961365, 24939.971985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.018188, 24893.716064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18992.460770, 24842.017334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.403625, 24862.046875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30270.994690, 24368.904388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25700.895416, 24392.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.537628, 24307.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.663147, 23990.809631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26565.630493, 24035.281372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17344.243805, 24055.350739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30942.961365, 23938.954254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.316376, 24236.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.165375, 23845.603424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20004.771667, 23759.391968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18971.132919, 23793.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.822723, 23550.802246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21649.140167, 23693.889740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.804657, 23359.695892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.691162, 23343.771027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20752.317734, 23366.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.857056, 23077.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.908966, 22781.098633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20137.561630, 22652.473083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.059784, 22501.749725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21008.226715, 22629.047760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28710.527771, 22101.697876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25005.806091, 22129.123001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22595.716522, 22170.265335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17465.027725, 22117.843109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24055.133026, 21851.341888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.940628, 21671.147705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.313385, 21481.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30131.610962, 21059.324081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.512115, 21171.459244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.588562, 20948.054459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20786.776031, 20926.044266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27191.412933, 20866.918091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34654.240967, 20833.547028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20832.163757, 20517.103378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29907.924744, 20129.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.967285, 20052.130753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22334.286407, 19797.520081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.607971, 19686.227890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34832.693451, 19600.469116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19239.243088, 19332.684189, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 11:20:08 2012] Writing fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43.gif
[Mon Sep  3 11:54:23 2012] Mean detx,y = (2074.88, -11516.18) 
[Mon Sep  3 11:54:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 12:02:35 2012] grppha failed
[Mon Sep  3 12:02:36 2012] Setting source spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43_src.pi.gz
[Mon Sep  3 12:02:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Sep  3 14:02:19 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:19 2012] Error reading totcts from fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43_src.pi.gz
[Mon Sep  3 14:02:20 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:28 2012] Flag c found in src. 43 procflags, skipping spectral fitting
[Mon Sep  3 14:02:28 2012] Source 43 has no response, skipping
[Mon Sep  3 14:02:29 2012] xmm0109490101/analysis//spectral/fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete