[Sun Sep  2 18:27:28 2012] Detection parameters:
  Position = (313.0, 454.1) = 16 54 8.56 -41 39 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.7 +/- 15.9
  Background counts = 37.3
  Rate = 0.003 +/- 0.0005

[Sun Sep  2 18:27:31 2012] Off-axis axis estimate = 11.33'
[Sun Sep  2 18:31:34 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:31:34 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Sep  2 18:31:34 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Sun Sep  2 18:31:34 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 12.10"
[Sun Sep  2 21:54:26 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Sep  2 21:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37.csv
[Sun Sep  2 21:54:26 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Sep  2 21:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37.csv
[Sun Sep  2 21:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 21:54:28 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Sep  2 21:54:28 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Sep  2 21:54:28 2012] Fit fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Sep  3 03:49:21 2012] Warning, spatial fit 37 centroid is now closest to src. 43
[Mon Sep  3 03:49:21 2012] Spatial fit model total counts = 598.157000, observed total counts = 580.000000
[Mon Sep  3 03:49:21 2012] Offset between fit and detection position for source 42 = 2.570728 pixels
[Mon Sep  3 03:49:21 2012] Warning, changing simple spatial fit ID from 37 to 38
[Mon Sep  3 03:49:21 2012] 576.331000 total counts/ 398.092000 bgd. counts: snr = 8.933281
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.570728 pixels
  Position = (315.0, 452.5) = 16 54 7.77 -41 39 49.4
  Extent = 23.9 (21.3-47.8)" x 7.5 (4.7-10.2)", rotation angle = 36 (29-43) degrees
  Source counts = 178.2 +/- 24.0
  Background counts = 398.1
  Rate = 0.006 +/- 0.0008
[Mon Sep  3 03:49:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 03:49:22 2012] Source does appear to be extended
[Mon Sep  3 03:49:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.08
[Mon Sep  3 03:49:22 2012] Source is asymmetric
[Mon Sep  3 03:49:22 2012] Source is confused with source 5
[Mon Sep  3 03:50:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:50:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 03:50:14 2012] Initial guess for spatial extent in simple fitting = 15.71"
[Mon Sep  3 03:50:14 2012] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.065
[Mon Sep  3 03:50:14 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 15.71"
[Mon Sep  3 06:42:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Sep  3 06:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37.csv
[Mon Sep  3 06:42:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Sep  3 06:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37.csv
[Mon Sep  3 06:42:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Sep  3 06:42:31 2012] Fit fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Sep  3 11:19:01 2012] Warning, spatial fit 37 centroid is now closest to src. 5
[Mon Sep  3 11:19:01 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:01 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:01 2012] Source does appear to be extended
[Mon Sep  3 11:19:01 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.08
[Mon Sep  3 11:19:01 2012] Source is asymmetric
[Mon Sep  3 11:20:08 2012] XMMSAS src. selection expression = ellipse(27358.606000, 39320.758000, 1433.016041, 451.599013, 35.916000, X, Y)
[Mon Sep  3 11:20:08 2012] Writing source region out to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42_src.reg
[Mon Sep  3 11:20:08 2012] Extracting stamp from image fullrun_pn_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (233, 370) - (397, 535)
[Mon Sep  3 11:20:08 2012] XMMSAS bgd. selection expression = annulus(27358.606000, 39320.758000, 2388.360069, 4776.720137, X, Y) && !ellipse(26674.658000, 39950.404000, 496.056814, 496.056814, 0.000000, X, Y) && !ellipse(25413.008600, 38009.881000, 512.925615, 512.925615, 0.000000, X, Y) && !ellipse(29176.628784, 35630.049194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28664.619659, 34756.480835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.722400, 40882.151000, 503.832014, 503.832014, 0.000000, X, Y) && !ellipse(27617.444244, 42723.225464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31550.371002, 40258.375916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.902000, 38870.686000, 1935.280056, 1935.280056, 0.000000, X, Y) && !ellipse(21986.303665, 38410.345428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24011.771088, 38197.568726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32071.231995, 36697.116089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29549.371002, 36404.614166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.698364, 36131.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.879242, 36157.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.568573, 36058.969177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29823.760315, 34308.731384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32330.864655, 33921.630768, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 11:20:08 2012] Writing fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42.gif
[Mon Sep  3 11:53:03 2012] Mean detx,y = (1862.36, -11609.81) 
[Mon Sep  3 11:53:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 11:53:54 2012] grppha failed
[Mon Sep  3 11:53:55 2012] Setting source spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42_src.pi.gz
[Mon Sep  3 11:53:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Sep  3 14:02:19 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:19 2012] Error reading totcts from fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42_src.pi.gz
[Mon Sep  3 14:02:20 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:28 2012] Flag c found in src. 42 procflags, skipping spectral fitting
[Mon Sep  3 14:02:28 2012] Source 42 has no response, skipping
[Mon Sep  3 14:02:29 2012] xmm0109490101/analysis//spectral/fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete