[Sun Sep  2 18:27:30 2012] Detection parameters:
  Position = (290.1, 332.9) = 16 54 17.44 -41 48 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.9 +/- 23.5
  Background counts = 95.0
  Rate = 0.01 +/- 0.001

[Sun Sep  2 18:27:31 2012] Off-axis axis estimate = 2.57'
[Sun Sep  2 18:31:34 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:31:34 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Sep  2 18:31:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun Sep  2 18:31:34 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 7.72"
[Sun Sep  2 21:54:27 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98.ximg exists
[Sun Sep  2 21:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98.csv
[Sun Sep  2 21:54:27 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98_1.ximg exists
[Sun Sep  2 21:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98.csv
[Sun Sep  2 21:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 21:54:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sun Sep  2 21:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98.csv
[Sun Sep  2 21:54:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sun Sep  2 21:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98.csv
[Sun Sep  2 21:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:22 2012] Warning, spatial fit 98 centroid is now closest to src. 95
[Mon Sep  3 03:49:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:22 2012] Assessing source extent using major
[Mon Sep  3 03:49:22 2012] Source does appear to be extended
[Mon Sep  3 03:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:50:14 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:50:14 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Mon Sep  3 03:50:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Mon Sep  3 03:50:14 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 7.72"
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89.ximg exists
[Mon Sep  3 06:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89.csv
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89_1.ximg exists
[Mon Sep  3 06:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89.csv
[Mon Sep  3 06:42:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 06:42:32 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Mon Sep  3 06:42:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89.csv
[Mon Sep  3 06:42:32 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Mon Sep  3 06:42:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89.csv
[Mon Sep  3 06:42:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 11:19:01 2012] Spatial fit model total counts = 684.632000, observed total counts = 1183.000000
[Mon Sep  3 11:19:01 2012] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 11:19:01 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:01 2012] Assessing source extent using major
[Mon Sep  3 11:19:01 2012] Source does appear to be extended
[Mon Sep  3 11:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 11:20:10 2012] XMMSAS src. selection expression = ellipse(25193.314880, 28918.060791, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep  3 11:20:10 2012] Writing source region out to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104_src.reg
[Mon Sep  3 11:20:10 2012] Extracting stamp from image fullrun_pn_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (253, 295) - (328, 370)
[Mon Sep  3 11:20:10 2012] XMMSAS bgd. selection expression = annulus(25193.314880, 28918.060791, 1087.500000, 2175.000000, X, Y) && !ellipse(26832.646620, 27702.488000, 1410.513641, 1410.513641, 0.000000, X, Y) && !ellipse(23162.031616, 28515.930054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.686000, 27929.380000, 1191.088034, 1191.088034, 0.000000, X, Y) && !ellipse(23276.689056, 27200.278076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25927.960000, 26918.888000, 437.129613, 437.129613, 0.000000, X, Y) && !ellipse(23845.852997, 26683.813812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.635040, 26486.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27274.738373, 31344.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.279297, 31013.866577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.705261, 30563.233765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.734000, 30329.682000, 518.305615, 518.305615, 0.000000, X, Y) && !ellipse(23343.625000, 30017.816406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.497780, 29917.686400, 402.359212, 402.359212, 0.000000, X, Y) && !ellipse(25838.518860, 29747.359192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26709.790619, 29728.487244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.584991, 29169.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.050446, 29147.500458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22976.105225, 29197.136230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.990326, 27433.339203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24927.700439, 26912.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.181610, 26664.009949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.209229, 26297.621216, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 11:20:10 2012] Writing fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104.gif
[Mon Sep  3 12:31:43 2012] Mean detx,y = (-1474.81, -1621.30) 
[Mon Sep  3 12:31:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 12:32:08 2012] grppha failed
[Mon Sep  3 12:32:08 2012] Setting source spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104_src.pi.gz
[Mon Sep  3 12:32:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Mon Sep  3 13:15:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep  3 13:15:15 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:19 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:19 2012] Error reading totcts from fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104_src.pi.gz
[Mon Sep  3 14:02:20 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 14:02:29 2012] xmm0109490101/analysis//spectral/fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete