[Sun Sep  2 18:27:30 2012] Detection parameters:
  Position = (311.5, 335.6) = 16 54 9.13 -41 48 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 14.6
  Background counts = 97.8
  Rate = 0.004 +/- 0.0009

[Sun Sep  2 18:27:31 2012] Off-axis axis estimate = 2.86'
[Sun Sep  2 18:31:34 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:31:34 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Sep  2 18:31:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.611
[Sun Sep  2 18:31:34 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.86"
[Sun Sep  2 21:54:27 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96.ximg exists
[Sun Sep  2 21:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96.csv
[Sun Sep  2 21:54:27 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96_1.ximg exists
[Sun Sep  2 21:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96.csv
[Sun Sep  2 21:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 21:54:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Sun Sep  2 21:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Sun Sep  2 21:54:30 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Sun Sep  2 21:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Sun Sep  2 21:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:22 2012] Warning, spatial fit 96 centroid is now closest to src. 101
[Mon Sep  3 03:49:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:22 2012] Assessing source extent using major
[Mon Sep  3 03:49:22 2012] Source does appear to be extended
[Mon Sep  3 03:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:50:14 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:50:14 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Mon Sep  3 03:50:14 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.611
[Mon Sep  3 03:50:14 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 7.86"
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87.ximg exists
[Mon Sep  3 06:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87.csv
[Mon Sep  3 06:42:31 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87_1.ximg exists
[Mon Sep  3 06:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87.csv
[Mon Sep  3 06:42:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 06:42:32 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Mon Sep  3 06:42:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87.csv
[Mon Sep  3 06:42:32 2012] fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Mon Sep  3 06:42:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87.csv
[Mon Sep  3 06:42:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 11:19:01 2012] Source 102 is offset by 6.424350 and 6.185500 pixels which is larger than
2 X fitted extent = 1.601292 x 1.601292, not incorporating fit results
[Mon Sep  3 11:19:01 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:01 2012] Assessing source extent using major
[Mon Sep  3 11:19:01 2012] Source does appear to be extended
[Mon Sep  3 11:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 11:20:10 2012] XMMSAS src. selection expression = ellipse(27052.050446, 29147.500458, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep  3 11:20:10 2012] Writing source region out to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102_src.reg
[Mon Sep  3 11:20:10 2012] Extracting stamp from image fullrun_pn_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (274, 298) - (349, 373)
[Mon Sep  3 11:20:10 2012] XMMSAS bgd. selection expression = annulus(27052.050446, 29147.500458, 1087.500000, 2175.000000, X, Y) && !ellipse(26832.646620, 27702.488000, 1410.513641, 1410.513641, 0.000000, X, Y) && !ellipse(28694.196686, 29236.462524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28282.442800, 30103.026400, 453.796813, 453.796813, 0.000000, X, Y) && !ellipse(29712.450867, 31122.011230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.664612, 29956.875519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.686000, 27929.380000, 1191.088034, 1191.088034, 0.000000, X, Y) && !ellipse(25927.960000, 26918.888000, 437.129613, 437.129613, 0.000000, X, Y) && !ellipse(26132.635040, 26486.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28085.006600, 26506.820000, 481.679214, 457.820013, 91.051492, X, Y) && !ellipse(25305.208200, 32672.706000, 1458.272042, 972.584028, 313.083700, X, Y) && !ellipse(29670.589020, 31582.945557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28758.042860, 31690.956400, 539.776016, 270.643208, 227.578000, X, Y) && !ellipse(27274.738373, 31344.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.279297, 31013.866577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.705261, 30563.233765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.734000, 30329.682000, 518.305615, 518.305615, 0.000000, X, Y) && !ellipse(25344.497780, 29917.686400, 402.359212, 402.359212, 0.000000, X, Y) && !ellipse(25838.518860, 29747.359192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26709.790619, 29728.487244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.584991, 29169.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25193.314880, 28918.060791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29181.344116, 28307.640350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.990326, 27433.339203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.996033, 27246.231323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.839600, 26790.328800, 269.588008, 269.588008, 0.000000, X, Y) && !ellipse(24927.700439, 26912.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.181610, 26664.009949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.209229, 26297.621216, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 11:20:10 2012] Writing fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102.gif
[Mon Sep  3 12:30:24 2012] Mean detx,y = (432.75, -1635.37) 
[Mon Sep  3 12:30:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 12:30:44 2012] grppha failed
[Mon Sep  3 12:30:44 2012] Setting source spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102_src.pi.gz
[Mon Sep  3 12:30:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Mon Sep  3 13:15:15 2012] Not generating rmf since there are only 73 counts
[Mon Sep  3 13:15:15 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:19 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:19 2012] Error reading totcts from fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102_src.pi.gz
[Mon Sep  3 14:02:20 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 14:02:29 2012] xmm0109490101/analysis//spectral/fullrun_pn_xmm0109490101_pi300-10000_pass1_cl_src102_pl.csv not found, spectral fit skipped or did not complete