[Sun Sep  2 18:29:03 2012] Detection parameters:
  Position = (459.4, 339.8) = 16 53 11.59 -41 47 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.0 +/- 11.6
  Background counts = 9.6
  Rate = 0.002 +/- 0.0003

[Sun Sep  2 18:29:05 2012] Off-axis axis estimate = 12.05'
[Mon Sep  3 01:04:03 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 01:04:03 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Mon Sep  3 01:04:03 2012] source mask rpix=2.9, npix_max = 45, mask sum = 44, frac = 0.973
[Mon Sep  3 01:04:03 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 12.45"
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62.csv
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62.csv
[Mon Sep  3 03:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:05 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Sep  3 03:49:05 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Sep  3 03:49:05 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Mon Sep  3 03:49:47 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.332524 pixels away
[Mon Sep  3 03:49:48 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:48 2012] Assessing source extent using major
[Mon Sep  3 03:49:48 2012] Source does appear to be extended
[Mon Sep  3 03:49:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:49:48 2012] Source is confused with source 68
[Mon Sep  3 08:54:28 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:54:28 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Mon Sep  3 08:54:28 2012] source mask rpix=2.9, npix_max = 45, mask sum = 44, frac = 0.973
[Mon Sep  3 08:54:28 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 12.45"
[Mon Sep  3 11:18:35 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59.ximg exists
[Mon Sep  3 11:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 11:18:35 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Sep  3 11:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 11:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 11:18:37 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Sep  3 11:18:37 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Sep  3 11:18:37 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Mon Sep  3 11:19:37 2012] Spatial fit model total counts = 210.750000, observed total counts = 194.000000
[Mon Sep  3 11:19:37 2012] Offset between fit and detection position for source 21 = 0.251130 pixels
[Mon Sep  3 11:19:37 2012] 215.180500 total counts/ 178.924000 bgd. counts: snr = 2.710514
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.251130 pixels
  Position = (459.2, 340.0) = 16 53 11.66 -41 47 57.9
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 36.3 +/- 14.7
  Background counts = 178.9
  Rate = 0.001 +/- 0.0004
[Mon Sep  3 11:19:37 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:37 2012] Assessing source extent using major
[Mon Sep  3 11:19:37 2012] Source does appear to be extended
[Mon Sep  3 11:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:37:33 2012] XMMSAS src. selection expression = ellipse(39904.671400, 29529.622000, 186.798605, 186.798605, 0.000000, X, Y)
[Mon Sep  3 13:37:33 2012] Writing source region out to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21_src.reg
[Mon Sep  3 13:37:33 2012] Extracting stamp from image fullrun_mos2_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (448, 329) - (470, 351)
[Mon Sep  3 13:37:33 2012] XMMSAS bgd. selection expression = annulus(39904.671400, 29529.622000, 311.331009, 622.662018, X, Y) && !ellipse(40265.517944, 30012.365631, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 13:37:33 2012] Writing fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21.gif
[Mon Sep  3 13:54:21 2012] Mean detx,y = (-13118.21, 409.89) 
[Mon Sep  3 13:54:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:54:29 2012] grppha failed
[Mon Sep  3 13:54:29 2012] Setting source spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Sep  3 13:54:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Sep  3 14:01:22 2012] Not generating rmf since there are only 36 counts
[Mon Sep  3 14:01:22 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:22 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:22 2012] Error reading totcts from fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Sep  3 14:02:23 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:27 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Mon Sep  3 14:02:27 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 14:02:28 2012] xmm0109490101/analysis//spectral/fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete