[Sun Sep  2 18:29:03 2012] Detection parameters:
  Position = (330.3, 334.2) = 16 54 1.81 -41 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2487.7 +/- 61.5
  Background counts = 41.3
  Rate = 0.08 +/- 0.002

[Sun Sep  2 18:29:05 2012] Off-axis axis estimate = 3.47'
[Mon Sep  3 01:04:03 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 01:04:03 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Mon Sep  3 01:04:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Mon Sep  3 01:04:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.17"
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 03:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:04 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep  3 03:49:04 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep  3 03:49:04 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Sep  3 03:49:47 2012] Spatial fit model total counts = 2806.130000, observed total counts = 2805.000000
[Mon Sep  3 03:49:47 2012] Offset between fit and detection position for source 2 = 0.222924 pixels
[Mon Sep  3 03:49:47 2012] 2836.380000 total counts/ 1180.580000 bgd. counts: snr = 48.190360
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.222924 pixels
  Position = (330.1, 334.4) = 16 54 1.88 -41 48 23.4
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 1655.8 +/- 53.3
  Background counts = 1180.6
  Rate = 0.05 +/- 0.002
[Mon Sep  3 03:49:48 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:48 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 03:49:48 2012] Source does appear to be extended
[Mon Sep  3 03:49:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 08:54:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:54:28 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Mon Sep  3 08:54:28 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.010
[Mon Sep  3 08:54:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.32"
[Mon Sep  3 11:18:34 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Sep  3 11:18:34 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Sep  3 11:18:34 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Sep  3 11:18:35 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep  3 11:18:35 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep  3 11:18:35 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Sep  3 11:19:36 2012] Spatial fit model total counts = 2810.440000, observed total counts = 2805.000000
[Mon Sep  3 11:19:36 2012] Offset between fit and detection position for source 2 = 0.015736 pixels
[Mon Sep  3 11:19:36 2012] 2842.640000 total counts/ 1184.540000 bgd. counts: snr = 48.176567
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.015736 pixels
  Position = (330.1, 334.3) = 16 54 1.89 -41 48 23.4
  Extent = 5.5 (5.4-5.9)" x 5.0 (4.8-5.2)", rotation angle = 348 (327-358) degrees
  Source counts = 1658.1 +/- 53.3
  Background counts = 1184.5
  Rate = 0.05 +/- 0.002
[Mon Sep  3 11:19:37 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:37 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:37 2012] Source does appear to be extended
[Mon Sep  3 11:19:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Mon Sep  3 13:37:31 2012] Counts = 1658.100000, rescaling region sizes by 2.000000
[Mon Sep  3 13:37:31 2012] XMMSAS src. selection expression = ellipse(28671.055080, 29039.740800, 663.386419, 604.384817, 347.954100, X, Y)
[Mon Sep  3 13:37:31 2012] Writing source region out to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2_src.reg
[Mon Sep  3 13:37:31 2012] Extracting stamp from image fullrun_mos2_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (292, 296) - (368, 372)
[Mon Sep  3 13:37:31 2012] XMMSAS bgd. selection expression = annulus(28671.055080, 29039.740800, 2211.288064, 4422.576127, X, Y) && !ellipse(26830.128200, 27697.259600, 434.775213, 434.775213, 0.000000, X, Y) && !ellipse(28278.324200, 30102.328000, 407.856012, 407.856012, 0.000000, X, Y) && !ellipse(26477.233580, 25949.283600, 365.583211, 365.583211, 0.000000, X, Y) && !ellipse(25821.014000, 26716.986000, 460.971213, 460.971213, 0.000000, X, Y) && !ellipse(24661.297360, 26901.967000, 341.040010, 341.040010, 0.000000, X, Y) && !ellipse(23835.870000, 26696.184000, 450.550413, 450.550413, 0.000000, X, Y) && !ellipse(27329.988000, 24829.122800, 761.809622, 761.809622, 0.000000, X, Y) && !ellipse(26130.970000, 26465.068000, 230.485607, 230.485607, 0.000000, X, Y) && !ellipse(24688.996280, 28039.585782, 378.766207, 246.428420, 77.165655, X, Y) && !ellipse(27606.245331, 25796.837555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29835.980000, 24001.974000, 2650.032076, 2650.032076, 0.000000, X, Y) && !ellipse(29692.895000, 31099.640000, 278.648808, 278.648808, 0.000000, X, Y) && !ellipse(29641.656000, 30299.178000, 1370.872039, 1370.872039, 0.000000, X, Y) && !ellipse(30670.052000, 24926.656000, 1325.416038, 1325.416038, 0.000000, X, Y) && !ellipse(30935.290000, 26464.218600, 369.072011, 369.072011, 0.000000, X, Y) && !ellipse(25198.689100, 28917.921600, 258.632007, 258.632007, 0.000000, X, Y) && !ellipse(28778.331909, 27256.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.915771, 31283.330811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27670.244812, 32226.471558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29607.301086, 31584.294312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25309.797200, 29918.034800, 307.424009, 307.424009, 0.000000, X, Y) && !ellipse(24908.370600, 25389.508200, 1092.240031, 1092.240031, 0.000000, X, Y) && !ellipse(31754.481800, 29662.793600, 263.076008, 263.076008, 0.000000, X, Y) && !ellipse(31445.623428, 31526.693800, 441.856813, 441.856813, 0.000000, X, Y) && !ellipse(24605.799377, 25439.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.942800, 29494.427800, 777.056822, 777.056822, 0.000000, X, Y) && !ellipse(26378.696000, 30358.820800, 374.968011, 374.968011, 0.000000, X, Y) && !ellipse(31364.622480, 33930.159600, 623.367218, 623.367218, 0.000000, X, Y) && !ellipse(27683.546200, 33266.119560, 341.695210, 341.695210, 0.000000, X, Y) && !ellipse(28735.633728, 31682.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.391541, 29083.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32101.352000, 26251.693800, 1476.288042, 1476.288042, 0.000000, X, Y) && !ellipse(28867.712061, 24273.649976, 1184.077191, 336.558075, 4.533248, X, Y) && !ellipse(24052.026000, 26090.238000, 1071.968031, 1071.968031, 0.000000, X, Y) && !ellipse(24034.142365, 28300.400085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25645.635200, 24358.158400, 544.932016, 544.932016, 0.000000, X, Y) && !ellipse(29816.166931, 28714.635101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30803.135000, 30848.270200, 599.962417, 599.962417, 0.000000, X, Y) && !ellipse(32616.691833, 26357.903656, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 13:37:31 2012] Writing fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2.gif
[Mon Sep  3 13:37:52 2012] Mean detx,y = (-1900.19, 1186.07) 
[Mon Sep  3 13:37:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:38:06 2012] grppha failed
[Mon Sep  3 13:38:06 2012] Setting source spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Sep  3 13:38:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Sep  3 14:02:22 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:22 2012] Error reading totcts from fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Sep  3 14:02:23 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:27 2012] Source 2 has no response, skipping
[Mon Sep  3 14:02:28 2012] xmm0109490101/analysis//spectral/fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete