[Sun Sep  2 18:29:03 2012] Detection parameters:
  Position = (330.3, 401.6) = 16 54 1.84 -41 43 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.2 +/- 15.2
  Background counts = 17.4
  Rate = 0.008 +/- 0.0008

[Sun Sep  2 18:29:05 2012] Off-axis axis estimate = 7.83'
[Mon Sep  3 01:04:03 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 01:04:03 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Sep  3 01:04:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.725
[Mon Sep  3 01:04:03 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.34"
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21.csv
[Mon Sep  3 03:49:03 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Sep  3 03:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21.csv
[Mon Sep  3 03:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:04 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Sep  3 03:49:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Sep  3 03:49:04 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Sep  3 03:49:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Sep  3 03:49:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:47 2012] Spatial fit model total counts = 472.154000, observed total counts = 370.000000
[Mon Sep  3 03:49:47 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 03:49:48 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:48 2012] Assessing source extent using major
[Mon Sep  3 03:49:48 2012] Source does appear to be extended
[Mon Sep  3 03:49:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 08:54:28 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:54:28 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Sep  3 08:54:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.725
[Mon Sep  3 08:54:28 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.34"
[Mon Sep  3 11:18:34 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Sep  3 11:18:34 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Sep  3 11:18:34 2012] Fit fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_src21 appears to have run properly
[Mon Sep  3 11:18:36 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Sep  3 11:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Sep  3 11:18:36 2012] fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Sep  3 11:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Sep  3 11:18:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 11:19:36 2012] Spatial fit model total counts = 402.144000, observed total counts = 370.000000
[Mon Sep  3 11:19:36 2012] Offset between fit and detection position for source 14 = 0.802286 pixels
[Mon Sep  3 11:19:36 2012] 401.107000 total counts/ 278.659000 bgd. counts: snr = 7.335254
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.802286 pixels
  Position = (330.3, 400.8) = 16 54 1.82 -41 43 34.4
  Extent = 4.0" x 4.0", rotation angle = 0
  Source counts = 122.4 +/- 20.0
  Background counts = 278.7
  Rate = 0.004 +/- 0.0006
[Mon Sep  3 11:19:37 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:37 2012] Assessing source extent using major
[Mon Sep  3 11:19:37 2012] Source does appear to be extended
[Mon Sep  3 11:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:37:31 2012] XMMSAS src. selection expression = ellipse(28690.116800, 34821.662400, 237.681607, 237.681607, 0.000000, X, Y)
[Mon Sep  3 13:37:31 2012] Writing source region out to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14_src.reg
[Mon Sep  3 13:37:31 2012] Extracting stamp from image fullrun_mos2_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (317, 387) - (344, 414)
[Mon Sep  3 13:37:31 2012] XMMSAS bgd. selection expression = annulus(28690.116800, 34821.662400, 396.136011, 792.272023, X, Y) && !ellipse(29104.050300, 35637.296400, 540.058416, 540.058416, 0.000000, X, Y) && !ellipse(30079.836000, 36746.196000, 1769.688051, 1769.688051, 0.000000, X, Y)
[Mon Sep  3 13:37:31 2012] Writing fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14.gif
[Mon Sep  3 13:42:16 2012] Mean detx,y = (-2536.91, 6892.48) 
[Mon Sep  3 13:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:42:24 2012] grppha failed
[Mon Sep  3 13:42:24 2012] Setting source spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14_src.pi.gz
[Mon Sep  3 13:42:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Sep  3 14:02:22 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:22 2012] Error reading totcts from fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14_src.pi.gz
[Mon Sep  3 14:02:23 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:27 2012] Flag p found in src. 14 procflags, skipping spectral fitting
[Mon Sep  3 14:02:27 2012] Source 14 has no response, skipping
[Mon Sep  3 14:02:28 2012] xmm0109490101/analysis//spectral/fullrun_mos2_xmm0109490101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete