[Sun Sep 2 18:28:15 2012] Detection parameters: Position = (280.6, 303.2) = 16 54 21.15 -41 50 38.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 53.4 +/- 13.4 Background counts = 39.7 Rate = 0.002 +/- 0.0005 [Sun Sep 2 18:28:15 2012] Off-axis axis estimate = 1.34' [Sun Sep 2 21:54:30 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 7.10" [Sun Sep 2 21:54:30 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.100 [Sun Sep 2 21:54:30 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 7.10" [Mon Sep 3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81.ximg exists [Mon Sep 3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81.csv [Mon Sep 3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81_1.ximg exists [Mon Sep 3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81.csv [Mon Sep 3 01:04:00 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists [Mon Sep 3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists [Mon Sep 3 01:04:02 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly [Mon Sep 3 03:49:35 2012] Source 92 is offset by 5.971552 and -4.101189 pixels which is larger than 2 X fitted extent = 2.824170 x 2.824170, not incorporating fit results [Mon Sep 3 03:49:36 2012] Source 92 is offset by 6.159453 and -4.145109 pixels which is larger than 2 X fitted extent = 2.880492 x 2.880492, not incorporating fit results [Mon Sep 3 03:49:36 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 03:49:36 2012] Assessing source extent using major [Mon Sep 3 03:49:36 2012] Source does appear to be extended [Mon Sep 3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 03:49:36 2012] Source is confused with source 33 [Mon Sep 3 06:42:32 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 7.10" [Mon Sep 3 06:42:32 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.100 [Mon Sep 3 06:42:32 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.10" [Mon Sep 3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71.ximg exists [Mon Sep 3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71.csv [Mon Sep 3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71_1.ximg exists [Mon Sep 3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71.csv [Mon Sep 3 08:54:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists [Mon Sep 3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists [Mon Sep 3 08:54:27 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly [Mon Sep 3 11:19:19 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 15.116573 pixels away [Mon Sep 3 11:19:19 2012] Source 92 is offset by 6.124257 and -4.056166 pixels which is larger than 2 X fitted extent = 2.515320 x 2.515320, not incorporating fit results [Mon Sep 3 11:19:19 2012] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 26.832231 pixels away [Mon Sep 3 11:19:19 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 11:19:19 2012] Assessing source extent using major [Mon Sep 3 11:19:19 2012] Source does appear to be extended [Mon Sep 3 11:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 13:15:24 2012] XMMSAS src. selection expression = ellipse(24364.494385, 26329.943542, 652.500000, 652.500000, 0.000000, X, Y) [Mon Sep 3 13:15:24 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92_src.reg [Mon Sep 3 13:15:24 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (243, 266) - (318, 341) [Mon Sep 3 13:15:24 2012] XMMSAS bgd. selection expression = annulus(24364.494385, 26329.943542, 1087.500000, 2175.000000, X, Y) && !ellipse(26833.963238, 27696.990040, 438.788013, 438.788013, 0.000000, X, Y) && !ellipse(26482.921440, 25954.048600, 374.613611, 374.613611, 0.000000, X, Y) && !ellipse(25934.292400, 26920.795200, 377.416011, 377.416011, 0.000000, X, Y) && !ellipse(24652.421000, 26917.199200, 360.324810, 360.324810, 0.000000, X, Y) && !ellipse(23268.865799, 27198.111804, 352.516834, 330.963939, 71.625909, X, Y) && !ellipse(22535.258850, 26155.030212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23857.506000, 26677.908000, 499.354414, 499.354414, 0.000000, X, Y) && !ellipse(27335.570800, 24836.955480, 804.032023, 804.032023, 0.000000, X, Y) && !ellipse(25861.462000, 26867.508000, 1068.880031, 1068.880031, 0.000000, X, Y) && !ellipse(24714.628200, 28030.126000, 293.560008, 293.560008, 0.000000, X, Y) && !ellipse(23172.088200, 28329.804200, 337.952010, 337.952010, 0.000000, X, Y) && !ellipse(22449.753632, 28552.577423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.708400, 25426.294340, 338.232010, 338.232010, 0.000000, X, Y) && !ellipse(22760.653100, 24843.784000, 396.881611, 396.881611, 0.000000, X, Y) && !ellipse(22071.079800, 25256.513400, 469.591214, 469.591214, 0.000000, X, Y) && !ellipse(24842.832000, 25369.176000, 1077.968031, 1077.968031, 0.000000, X, Y) && !ellipse(24669.624500, 24412.958600, 360.116810, 360.116810, 0.000000, X, Y) && !ellipse(21726.322000, 23613.230600, 1177.800034, 367.301611, 57.174417, X, Y) && !ellipse(26005.332000, 27803.420000, 1194.160034, 1194.160034, 0.000000, X, Y) && !ellipse(26209.256531, 24151.290222, 870.000000, 870.000000, 0.000000, X, Y) [Mon Sep 3 13:15:24 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92.gif [Mon Sep 3 13:33:20 2012] Mean detx,y = (-657.36, -2851.14) [Mon Sep 3 13:33:21 2012] Setting backscal keywords in source and bgd. spectrum [Mon Sep 3 13:33:29 2012] grppha failed [Mon Sep 3 13:33:29 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92_src.pi.gz [Mon Sep 3 13:33:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92_bgd.pi.gz [Mon Sep 3 13:37:29 2012] Not generating rmf since there are only 53 counts [Mon Sep 3 13:37:29 2012] rmf not generated due to insufficient counts [Mon Sep 3 14:02:21 2012] Updating aperture counts using extracted products [Mon Sep 3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92_src.pi.gz [Mon Sep 3 14:02:22 2012] No arf file for this source, not re-computing flux [Mon Sep 3 14:02:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Sep 3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src92_pl.csv not found, spectral fit skipped or did not complete