[Sun Sep  2 18:28:15 2012] Detection parameters:
  Position = (295.7, 319.0) = 16 54 15.26 -41 49 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.8 +/- 13.7
  Background counts = 44.3
  Rate = 0.002 +/- 0.0004

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 1.50'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Sep  2 21:54:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 7.18"
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src89.ximg exists
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src89_1.ximg exists
[Mon Sep  3 01:04:01 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src89 appears to have run properly
[Mon Sep  3 01:04:03 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Mon Sep  3 01:04:03 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Mon Sep  3 01:04:03 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Mon Sep  3 03:49:36 2012] Spatial fit model total counts = 773.958000, observed total counts = 764.000000
[Mon Sep  3 03:49:36 2012] Offset between fit and detection position for source 90 = 3.892894 pixels
[Mon Sep  3 03:49:36 2012] Warning, changing simple spatial fit ID from 89 to 80
[Mon Sep  3 03:49:36 2012] 704.037000 total counts/ 586.786000 bgd. counts: snr = 4.840349
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 3.892894 pixels
  Position = (299.5, 320.1) = 16 54 13.81 -41 49 25.3
  Extent = 14.9 (14.9-29.9)", rotation angle = 0
  Source counts = 117.3 +/- 26.5
  Background counts = 586.8
  Rate = 0.004 +/- 0.0008
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:49:36 2012] Source is confused with source 1
[Mon Sep  3 06:42:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:42:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 14.93"
[Mon Sep  3 06:42:32 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.906
[Mon Sep  3 06:42:32 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 14.93"
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77.csv
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77_1.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77.csv
[Mon Sep  3 08:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Mon Sep  3 08:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Mon Sep  3 08:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Mon Sep  3 08:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 11:19:19 2012] Warning, spatial fit 77 centroid is now closest to src. 92
[Mon Sep  3 11:19:19 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:19 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:19 2012] Source does appear to be extended
[Mon Sep  3 11:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:15:24 2012] XMMSAS src. selection expression = ellipse(26005.332000, 27803.420000, 895.620026, 895.620026, 0.000000, X, Y)
[Mon Sep  3 13:15:24 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90_src.reg
[Mon Sep  3 13:15:24 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (248, 269) - (351, 372)
[Mon Sep  3 13:15:24 2012] XMMSAS bgd. selection expression = annulus(26005.332000, 27803.420000, 1492.700043, 2985.400086, X, Y) && !ellipse(26833.963238, 27696.990040, 438.788013, 438.788013, 0.000000, X, Y) && !ellipse(28672.185820, 29035.014200, 407.001612, 407.001612, 0.000000, X, Y) && !ellipse(28289.980000, 30097.893000, 416.007212, 416.007212, 0.000000, X, Y) && !ellipse(26482.921440, 25954.048600, 374.613611, 374.613611, 0.000000, X, Y) && !ellipse(25934.292400, 26920.795200, 377.416011, 377.416011, 0.000000, X, Y) && !ellipse(24652.421000, 26917.199200, 360.324810, 360.324810, 0.000000, X, Y) && !ellipse(23268.865799, 27198.111804, 352.516834, 330.963939, 71.625909, X, Y) && !ellipse(22535.258850, 26155.030212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23857.506000, 26677.908000, 499.354414, 499.354414, 0.000000, X, Y) && !ellipse(27335.570800, 24836.955480, 804.032023, 804.032023, 0.000000, X, Y) && !ellipse(25861.462000, 26867.508000, 1068.880031, 1068.880031, 0.000000, X, Y) && !ellipse(24714.628200, 28030.126000, 293.560008, 293.560008, 0.000000, X, Y) && !ellipse(28065.703461, 26502.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.302368, 29898.138306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.168400, 25767.257400, 244.698407, 244.698407, 0.000000, X, Y) && !ellipse(23172.088200, 28329.804200, 337.952010, 337.952010, 0.000000, X, Y) && !ellipse(29647.893829, 31481.515472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28777.099976, 31563.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.206000, 30332.032000, 350.439210, 350.439210, 0.000000, X, Y) && !ellipse(24212.714020, 29433.697000, 503.358414, 503.358414, 0.000000, X, Y) && !ellipse(28768.627000, 27256.727800, 230.435207, 230.435207, 0.000000, X, Y) && !ellipse(22449.753632, 28552.577423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.445400, 28931.736200, 264.702408, 264.702408, 0.000000, X, Y) && !ellipse(24632.708400, 25426.294340, 338.232010, 338.232010, 0.000000, X, Y) && !ellipse(25328.940800, 29921.370800, 199.789606, 79.011762, 0.000000, X, Y) && !ellipse(22760.653100, 24843.784000, 396.881611, 396.881611, 0.000000, X, Y) && !ellipse(24842.832000, 25369.176000, 1077.968031, 1077.968031, 0.000000, X, Y) && !ellipse(24364.494385, 26329.943542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29820.462769, 27533.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.058800, 24099.188000, 901.256026, 901.256026, 0.000000, X, Y) && !ellipse(26209.256531, 24151.290222, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 13:15:24 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90.gif
[Mon Sep  3 13:34:49 2012] Mean detx,y = (272.30, -523.42) 
[Mon Sep  3 13:34:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:35:02 2012] grppha failed
[Mon Sep  3 13:35:02 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90_src.pi.gz
[Mon Sep  3 13:35:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Mon Sep  3 14:02:21 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90_src.pi.gz
[Mon Sep  3 14:02:22 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:26 2012] Flag c found in src. 90 procflags, skipping spectral fitting
[Mon Sep  3 14:02:26 2012] Source 90 has no response, skipping
[Mon Sep  3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete