[Sun Sep  2 18:28:15 2012] Detection parameters:
  Position = (307.5, 342.2) = 16 54 10.67 -41 47 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.7 +/- 13.7
  Background counts = 40.5
  Rate = 0.002 +/- 0.0004

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 3.24'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun Sep  2 21:54:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.131
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.05"
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61.csv
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61.csv
[Mon Sep  3 01:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Sep  3 01:04:02 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Mon Sep  3 03:49:36 2012] Spatial fit model total counts = 512.989000, observed total counts = 511.000000
[Mon Sep  3 03:49:36 2012] Offset between fit and detection position for source 80 = 0.490121 pixels
[Mon Sep  3 03:49:36 2012] Warning, changing simple spatial fit ID from 61 to 38
[Mon Sep  3 03:49:36 2012] 510.374800 total counts/ 484.140000 bgd. counts: snr = 1.192318
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.490121 pixels
  Position = (307.3, 342.6) = 16 54 10.78 -41 47 47.5
  Extent = 2.4 (2.1-3.6)", rotation angle = 0
  Source counts = 26.2 +/- 22.6
  Background counts = 484.1
  Rate = 0.0008 +/- 0.0007
  Deleting source due to low Poisson probability