[Sun Sep  2 18:28:13 2012] Detection parameters:
  Position = (325.9, 346.3) = 16 54 3.52 -41 47 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1529.8 +/- 47.7
  Background counts = 39.6
  Rate = 0.05 +/- 0.002

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 4.00'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Sun Sep  2 21:54:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.052
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.43"
[Mon Sep  3 01:03:59 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Sep  3 01:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3.csv
[Mon Sep  3 01:03:59 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Sep  3 01:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3.csv
[Mon Sep  3 01:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep  3 01:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep  3 01:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Sep  3 01:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:35 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.199963 pixels away
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 06:42:32 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Mon Sep  3 06:42:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.052
[Mon Sep  3 06:42:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.43"
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3.csv
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3.csv
[Mon Sep  3 08:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep  3 08:54:27 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep  3 11:19:19 2012] Spatial fit model total counts = 1808.530000, observed total counts = 1796.000000
[Mon Sep  3 11:19:19 2012] Offset between fit and detection position for source 3 = 0.264565 pixels
[Mon Sep  3 11:19:19 2012] 1790.858000 total counts/ 749.548000 bgd. counts: snr = 38.034728
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.264565 pixels
  Position = (325.7, 346.5) = 16 54 3.59 -41 47 30.5
  Extent = 5.2 (4.9-5.5)", rotation angle = 0
  Source counts = 1041.3 +/- 42.3
  Background counts = 749.5
  Rate = 0.03 +/- 0.001
[Mon Sep  3 11:19:19 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:19 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:19 2012] Source does appear to be extended
[Mon Sep  3 11:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:15:22 2012] Counts = 1041.310000, rescaling region sizes by 2.000000
[Mon Sep  3 13:15:22 2012] XMMSAS src. selection expression = ellipse(28289.980000, 30097.893000, 624.010818, 624.010818, 0.000000, X, Y)
[Mon Sep  3 13:15:22 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3_src.reg
[Mon Sep  3 13:15:22 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (290, 311) - (362, 382)
[Mon Sep  3 13:15:22 2012] XMMSAS bgd. selection expression = annulus(28289.980000, 30097.893000, 2080.036060, 4160.072120, X, Y) && !ellipse(26833.963238, 27696.990040, 438.788013, 438.788013, 0.000000, X, Y) && !ellipse(28672.185820, 29035.014200, 407.001612, 407.001612, 0.000000, X, Y) && !ellipse(26482.921440, 25954.048600, 374.613611, 374.613611, 0.000000, X, Y) && !ellipse(25934.292400, 26920.795200, 377.416011, 377.416011, 0.000000, X, Y) && !ellipse(24652.421000, 26917.199200, 360.324810, 360.324810, 0.000000, X, Y) && !ellipse(23857.506000, 26677.908000, 499.354414, 499.354414, 0.000000, X, Y) && !ellipse(25861.462000, 26867.508000, 1068.880031, 1068.880031, 0.000000, X, Y) && !ellipse(28679.660400, 34815.759674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.628200, 28030.126000, 293.560008, 293.560008, 0.000000, X, Y) && !ellipse(28065.703461, 26502.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.302368, 29898.138306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29693.853800, 31092.124400, 254.964807, 254.964807, 0.000000, X, Y) && !ellipse(27567.168400, 25767.257400, 244.698407, 244.698407, 0.000000, X, Y) && !ellipse(29647.893829, 31481.515472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28777.099976, 31563.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.206000, 30332.032000, 350.439210, 350.439210, 0.000000, X, Y) && !ellipse(24212.714020, 29433.697000, 503.358414, 503.358414, 0.000000, X, Y) && !ellipse(28768.627000, 27256.727800, 230.435207, 230.435207, 0.000000, X, Y) && !ellipse(31482.894400, 31485.715000, 418.681754, 418.681754, 0.000000, X, Y) && !ellipse(25204.445400, 28931.736200, 264.702408, 264.702408, 0.000000, X, Y) && !ellipse(25328.940800, 29921.370800, 199.789606, 79.011762, 0.000000, X, Y) && !ellipse(31765.509000, 29653.319000, 295.630409, 295.630409, 0.000000, X, Y) && !ellipse(24842.832000, 25369.176000, 1077.968031, 1077.968031, 0.000000, X, Y) && !ellipse(27666.121800, 32242.470400, 410.414412, 410.414412, 0.000000, X, Y) && !ellipse(32063.733000, 26146.312000, 542.631216, 542.631216, 0.000000, X, Y) && !ellipse(32040.756000, 28180.844000, 338.153610, 338.153610, 0.000000, X, Y) && !ellipse(24364.494385, 26329.943542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29820.462769, 27533.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.594060, 25609.252200, 478.014414, 478.014414, 0.000000, X, Y) && !ellipse(26005.332000, 27803.420000, 1194.160034, 1194.160034, 0.000000, X, Y)
[Mon Sep  3 13:15:22 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3.gif
[Mon Sep  3 13:16:11 2012] Mean detx,y = (2452.95, 1482.03) 
[Mon Sep  3 13:16:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:16:28 2012] grppha failed
[Mon Sep  3 13:16:28 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3_src.pi.gz
[Mon Sep  3 13:16:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Sep  3 14:02:21 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3_src.pi.gz
[Mon Sep  3 14:02:22 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:26 2012] Source 3 has no response, skipping
[Mon Sep  3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete