[Sun Sep  2 18:28:14 2012] Detection parameters:
  Position = (278.7, 338.7) = 16 54 21.89 -41 48 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.7 +/- 15.2
  Background counts = 32.4
  Rate = 0.004 +/- 0.0005

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 3.25'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun Sep  2 21:54:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.130
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.05"
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 01:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Sep  3 01:04:02 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Sep  3 03:49:36 2012] Spatial fit model total counts = 398.494000, observed total counts = 398.000000
[Mon Sep  3 03:49:36 2012] Offset between fit and detection position for source 26 = 0.226399 pixels
[Mon Sep  3 03:49:36 2012] 378.255600 total counts/ 295.565000 bgd. counts: snr = 4.809829
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.226399 pixels
  Position = (278.9, 338.9) = 16 54 21.82 -41 48 3.8
  Extent = 6.3 (5.1-7.8)", rotation angle = 0
  Source counts = 82.7 +/- 19.4
  Background counts = 295.6
  Rate = 0.002 +/- 0.0006
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 06:42:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 6.29"
[Mon Sep  3 06:42:32 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.056
[Mon Sep  3 06:42:32 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 6.29"
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37.csv
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37.csv
[Mon Sep  3 08:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Sep  3 08:54:27 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Sep  3 11:19:19 2012] Warning, spatial fit 37 centroid is now closest to src. 84
[Mon Sep  3 11:19:19 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:19 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:19 2012] Source does appear to be extended
[Mon Sep  3 11:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:15:23 2012] XMMSAS src. selection expression = ellipse(24212.714020, 29433.697000, 377.518811, 377.518811, 0.000000, X, Y)
[Mon Sep  3 13:15:23 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26_src.reg
[Mon Sep  3 13:15:23 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (257, 317) - (301, 361)
[Mon Sep  3 13:15:23 2012] XMMSAS bgd. selection expression = annulus(24212.714020, 29433.697000, 629.198018, 1258.396036, X, Y) && !ellipse(24714.628200, 28030.126000, 293.560008, 293.560008, 0.000000, X, Y) && !ellipse(23172.088200, 28329.804200, 337.952010, 337.952010, 0.000000, X, Y) && !ellipse(22449.753632, 28552.577423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.445400, 28931.736200, 264.702408, 264.702408, 0.000000, X, Y) && !ellipse(25328.940800, 29921.370800, 199.789606, 79.011762, 0.000000, X, Y) && !ellipse(26005.332000, 27803.420000, 1194.160034, 1194.160034, 0.000000, X, Y)
[Mon Sep  3 13:15:23 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26.gif
[Mon Sep  3 13:26:56 2012] Mean detx,y = (2276.57, -2650.86) 
[Mon Sep  3 13:26:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:27:06 2012] grppha failed
[Mon Sep  3 13:27:06 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26_src.pi.gz
[Mon Sep  3 13:27:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Sep  3 13:37:27 2012] Not generating rmf since there are only 82 counts
[Mon Sep  3 13:37:27 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:21 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26_src.pi.gz
[Mon Sep  3 14:02:22 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:26 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete