[Sun Sep  2 18:28:14 2012] Detection parameters:
  Position = (335.1, 344.2) = 16 53 59.94 -41 47 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.3 +/- 19.4
  Background counts = 38.3
  Rate = 0.006 +/- 0.0006

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 4.25'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sun Sep  2 21:54:30 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.945
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.55"
[Mon Sep  3 01:03:59 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Sep  3 01:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26.csv
[Mon Sep  3 01:03:59 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Sep  3 01:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26.csv
[Mon Sep  3 01:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Sep  3 01:04:01 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Sep  3 03:49:36 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.500518 pixels away
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 06:42:32 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Mon Sep  3 06:42:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.945
[Mon Sep  3 06:42:32 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.55"
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Sep  3 08:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 08:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Sep  3 08:54:27 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Sep  3 11:19:19 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.130769 pixels away
[Mon Sep  3 11:19:19 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:19 2012] Assessing source extent using major
[Mon Sep  3 11:19:19 2012] Source does appear to be extended
[Mon Sep  3 11:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:15:23 2012] XMMSAS src. selection expression = ellipse(29106.302368, 29898.138306, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep  3 13:15:23 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23_src.reg
[Mon Sep  3 13:15:23 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (298, 307) - (373, 382)
[Mon Sep  3 13:15:23 2012] XMMSAS bgd. selection expression = annulus(29106.302368, 29898.138306, 1087.500000, 2175.000000, X, Y) && !ellipse(26833.963238, 27696.990040, 438.788013, 438.788013, 0.000000, X, Y) && !ellipse(28672.185820, 29035.014200, 407.001612, 407.001612, 0.000000, X, Y) && !ellipse(28289.980000, 30097.893000, 416.007212, 416.007212, 0.000000, X, Y) && !ellipse(29693.853800, 31092.124400, 254.964807, 254.964807, 0.000000, X, Y) && !ellipse(29647.893829, 31481.515472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28777.099976, 31563.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31482.894400, 31485.715000, 418.681754, 418.681754, 0.000000, X, Y) && !ellipse(27666.121800, 32242.470400, 410.414412, 410.414412, 0.000000, X, Y) && !ellipse(29820.462769, 27533.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.332000, 27803.420000, 1194.160034, 1194.160034, 0.000000, X, Y)
[Mon Sep  3 13:15:23 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23.gif
[Mon Sep  3 13:24:37 2012] Mean detx,y = (2105.66, 2155.10) 
[Mon Sep  3 13:24:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:24:49 2012] grppha failed
[Mon Sep  3 13:24:49 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Sep  3 13:24:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Sep  3 13:37:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep  3 13:37:26 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:21 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Sep  3 14:02:22 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete