[Sun Sep  2 18:28:15 2012] Detection parameters:
  Position = (250.7, 230.1) = 16 54 32.83 -41 55 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.3 +/- 8.1
  Background counts = 14.9
  Rate = 0.002 +/- 0.0005

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 6.05'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sun Sep  2 21:54:30 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.050
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 9.45"
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92.ximg exists
[Mon Sep  3 01:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92.csv
[Mon Sep  3 01:04:01 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92_1.ximg exists
[Mon Sep  3 01:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92.csv
[Mon Sep  3 01:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:03 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Mon Sep  3 01:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92.csv
[Mon Sep  3 01:04:03 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Mon Sep  3 01:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92.csv
[Mon Sep  3 01:04:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:36 2012] Source 108 is offset by -8.466640 and 2.385455 pixels which is larger than
2 X fitted extent = 3.049407 x 1.113333, not incorporating fit results
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:49:36 2012] Deleting source due to low Poisson probability 0.9