[Sun Sep  2 18:28:15 2012] Detection parameters:
  Position = (249.6, 271.9) = 16 54 33.24 -41 52 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 10.9
  Background counts = 23.4
  Rate = 0.002 +/- 0.0005

[Sun Sep  2 18:28:15 2012] Off-axis axis estimate = 4.03'
[Sun Sep  2 21:54:30 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 21:54:30 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Sep  2 21:54:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Sep  2 21:54:30 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 8.44"
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76.csv
[Mon Sep  3 01:04:00 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76_1.ximg exists
[Mon Sep  3 01:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76.csv
[Mon Sep  3 01:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Mon Sep  3 01:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Mon Sep  3 01:04:02 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Mon Sep  3 01:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Mon Sep  3 01:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490101_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:49:36 2012] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 106 at 11.173224 pixels away
[Mon Sep  3 03:49:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 03:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 03:49:36 2012] Assessing source extent using major
[Mon Sep  3 03:49:36 2012] Source does appear to be extended
[Mon Sep  3 03:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 06:42:32 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:42:32 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Mon Sep  3 06:42:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Mon Sep  3 06:42:32 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 8.44"
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src68.ximg exists
[Mon Sep  3 08:54:26 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src68_1.ximg exists
[Mon Sep  3 08:54:26 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_src68 appears to have run properly
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Mon Sep  3 08:54:27 2012] fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Mon Sep  3 08:54:27 2012] Fit fullrun_mos1_xmm0109490101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Mon Sep  3 11:19:19 2012] Spatial fit model total counts = 285.463000, observed total counts = 262.000000
[Mon Sep  3 11:19:19 2012] Offset between fit and detection position for source 106 = 0.724442 pixels
[Mon Sep  3 11:19:19 2012] 276.582000 total counts/ 224.042000 bgd. counts: snr = 3.510147
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 0.724442 pixels
  Position = (250.3, 272.0) = 16 54 32.97 -41 52 54.7
  Extent = 14.7 (10.4-16.9)" x 4.6 (2.1-7.3)", rotation angle = 57 (38-68) degrees
  Source counts = 52.5 +/- 16.6
  Background counts = 224.0
  Rate = 0.002 +/- 0.0005
[Mon Sep  3 11:19:19 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 11:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 11:19:19 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 11:19:19 2012] Source does appear to be extended
[Mon Sep  3 11:19:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.42
[Mon Sep  3 13:15:24 2012] XMMSAS src. selection expression = ellipse(21726.322000, 23613.230600, 883.350025, 275.476208, 57.174417, X, Y)
[Mon Sep  3 13:15:24 2012] Writing source region out to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106_src.reg
[Mon Sep  3 13:15:24 2012] Extracting stamp from image fullrun_mos1_xmm0109490101_pi300-10000_cl_sm2.00.img.gz, (200, 221) - (301, 323)
[Mon Sep  3 13:15:24 2012] XMMSAS bgd. selection expression = annulus(21726.322000, 23613.230600, 1472.250042, 2944.500085, X, Y) && !ellipse(24652.421000, 26917.199200, 360.324810, 360.324810, 0.000000, X, Y) && !ellipse(22535.258850, 26155.030212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23857.506000, 26677.908000, 499.354414, 499.354414, 0.000000, X, Y) && !ellipse(18977.311600, 23786.947400, 368.955211, 368.955211, 0.000000, X, Y) && !ellipse(24413.942740, 22540.466400, 398.154411, 398.154411, 0.000000, X, Y) && !ellipse(24030.613700, 21190.189800, 410.776812, 410.776812, 0.000000, X, Y) && !ellipse(24632.708400, 25426.294340, 338.232010, 338.232010, 0.000000, X, Y) && !ellipse(22760.653100, 24843.784000, 396.881611, 396.881611, 0.000000, X, Y) && !ellipse(22071.079800, 25256.513400, 469.591214, 469.591214, 0.000000, X, Y) && !ellipse(24842.832000, 25369.176000, 1077.968031, 1077.968031, 0.000000, X, Y) && !ellipse(24669.624500, 24412.958600, 360.116810, 360.116810, 0.000000, X, Y) && !ellipse(24364.494385, 26329.943542, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 13:15:24 2012] Writing fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106.gif
[Mon Sep  3 13:32:25 2012] Mean detx,y = (-3302.60, -5877.62) 
[Mon Sep  3 13:32:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 13:32:43 2012] grppha failed
[Mon Sep  3 13:32:43 2012] Setting source spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106_src.pi.gz
[Mon Sep  3 13:32:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Mon Sep  3 13:37:29 2012] Not generating rmf since there are only 52 counts
[Mon Sep  3 13:37:29 2012] rmf not generated due to insufficient counts
[Mon Sep  3 14:02:21 2012] Updating aperture counts using extracted products
[Mon Sep  3 14:02:21 2012] Error reading totcts from fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106_src.pi.gz
[Mon Sep  3 14:02:22 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 14:02:26 2012] Source 106 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 14:02:27 2012] xmm0109490101/analysis//spectral/fullrun_mos1_xmm0109490101_pi300-10000_pass1_cl_src106_pl.csv not found, spectral fit skipped or did not complete