[Fri May  3 22:05:33 2013] Detection parameters:
  Position = (506.0, 185.2) = 12 42 10.14 -63 11 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 12.6
  Background counts = 30.1
  Rate = 0.001 +/- 0.0003

[Fri May  3 22:05:33 2013] Off-axis axis estimate = 17.14'
[Fri May  3 22:05:56 2013] Using EEF radius (= 15.00 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:05:56 2013] Initial guess for spatial extent in simple fitting = 15.00"
[Fri May  3 22:05:56 2013] source mask rpix=3.4, npix_max = 62, mask sum = 52, frac = 0.834
[Fri May  3 22:05:56 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 15.00"
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36.ximg exists
[Fri May  3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36.csv
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri May  3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36.csv
[Fri May  3 22:05:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri May  3 22:05:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May  3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri May  3 22:05:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May  3 22:05:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:08 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 19.236034 pixels away
[Fri May  3 22:06:08 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:08 2013] Assessing source extent using major
[Fri May  3 22:06:08 2013] Source does appear to be extended
[Fri May  3 22:06:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:08 2013] Source is confused with source 36
[Fri May  3 22:06:25 2013] Using EEF radius (= 15.00 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:06:25 2013] Initial guess for spatial extent in simple fitting = 15.00"
[Fri May  3 22:06:25 2013] source mask rpix=3.4, npix_max = 62, mask sum = 52, frac = 0.834
[Fri May  3 22:06:25 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 15.00"
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31.ximg exists
[Fri May  3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31.csv
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri May  3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31.csv
[Fri May  3 22:06:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri May  3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri May  3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri May  3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri May  3 22:06:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:34 2013] Source 38 is offset by -5.324498 and -2.485576 pixels which is larger than
2 X fitted extent = 1.665761 x 1.665761, not incorporating fit results
[Fri May  3 22:06:34 2013] Warning, spatial fit 31 centroid is now closest to src. 35
[Fri May  3 22:06:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:34 2013] Assessing source extent using major
[Fri May  3 22:06:34 2013] Source does appear to be extended
[Fri May  3 22:06:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:49 2013] XMMSAS src. selection expression = ellipse(43973.640717, 16062.882858, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 22:06:49 2013] Not overwriting source region fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.reg
[Fri May  3 22:06:49 2013] Extracting stamp from image fullrun_pn_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (469, 148) - (544, 223)
[Fri May  3 22:06:49 2013] XMMSAS bgd. selection expression = annulus(43973.640717, 16062.882858, 1087.500000, 2175.000000, X, Y) && !ellipse(41682.142000, 20174.930000, 2184.536063, 2184.536063, 0.000000, X, Y) && !ellipse(42691.082000, 18332.490000, 2165.792062, 2165.792062, 0.000000, X, Y) && !ellipse(42949.314484, 17944.001648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43304.326416, 17421.360458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43560.472000, 16883.456000, 1393.296040, 1393.296040, 0.000000, X, Y)
[Fri May  3 22:06:49 2013] Writing fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38.gif
[Fri May  3 22:06:53 2013] ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri May  3 22:06:53 2013] Mean detx,y = (-12115.33, -15639.69) 
[Fri May  3 22:06:53 2013] ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.img and ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri May  3 22:06:53 2013] ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.pi and ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri May  3 22:06:53 2013] Setting source spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.pi.gz
[Fri May  3 22:06:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri May  3 22:06:53 2013] ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri May  3 22:07:00 2013] Not generating rmf since there are only 63 counts
[Fri May  3 22:07:00 2013] rmf not generated due to insufficient counts
[Fri May  3 22:12:42 2013] Updating aperture counts using extracted products
[Fri May  3 22:12:42 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_src.pi.gz = 226.00
[Fri May  3 22:12:42 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_bgd.pi.gz = 220.00
[Fri May  3 22:12:42 2013] Got source and background scale factors 897498.000000, 0.000000
[Fri May  3 22:12:42 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May  3 22:12:43 2013] No arf file for this source, not re-computing flux
[Fri May  3 22:12:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 22:12:53 2013] xmm0109480401/analysis//spectral/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete