[Fri May 3 22:05:33 2013] Detection parameters: Position = (498.3, 200.8) = 12 42 15.17 -63 10 35.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 96.7 +/- 15.3 Background counts = 33.1 Rate = 0.002 +/- 0.0003 [Fri May 3 22:05:33 2013] Off-axis axis estimate = 16.13' [Fri May 3 22:05:56 2013] Using EEF radius (= 14.49 ")to estimate initial spatial extent for simple fitting [Fri May 3 22:05:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 22:05:56 2013] Initial guess for spatial extent in simple fitting = 14.49" [Fri May 3 22:05:56 2013] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090 [Fri May 3 22:05:56 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 14.49" [Fri May 3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33.ximg exists [Fri May 3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33.csv [Fri May 3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33_1.ximg exists [Fri May 3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33.csv [Fri May 3 22:05:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Fri May 3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Fri May 3 22:05:58 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Fri May 3 22:06:08 2013] Warning, spatial fit 33 centroid is now closest to src. 36 [Fri May 3 22:06:08 2013] Source 35 is offset by -1.771466 and 5.055918 pixels which is larger than 2 X fitted extent = 13.495908 x 2.738138, not incorporating fit results [Fri May 3 22:06:08 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:08 2013] Assessing source extent using major [Fri May 3 22:06:08 2013] Source does appear to be extended [Fri May 3 22:06:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 22:06:08 2013] Source is confused with source 32 [Fri May 3 22:06:25 2013] Using EEF radius (= 14.49 ")to estimate initial spatial extent for simple fitting [Fri May 3 22:06:25 2013] Initial guess for spatial extent in simple fitting = 14.49" [Fri May 3 22:06:25 2013] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090 [Fri May 3 22:06:25 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 14.49" [Fri May 3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28.ximg exists [Fri May 3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28.csv [Fri May 3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28_1.ximg exists [Fri May 3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28.csv [Fri May 3 22:06:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Fri May 3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Fri May 3 22:06:26 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Fri May 3 22:06:34 2013] Warning, spatial fit 28 centroid is now closest to src. 38 [Fri May 3 22:06:34 2013] Spatial fit model total counts = 1005.810000, observed total counts = 864.000000 [Fri May 3 22:06:34 2013] Poor agreement between spatial fit and data for source 35 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 3 22:06:34 2013] Source 35 is offset by -2.889512 and 7.331132 pixels which is larger than 2 X fitted extent = 3.249848 x 3.249848, not incorporating fit results [Fri May 3 22:06:34 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:34 2013] Assessing source extent using major [Fri May 3 22:06:34 2013] Source does appear to be extended [Fri May 3 22:06:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 22:06:49 2013] XMMSAS src. selection expression = ellipse(43304.326416, 17421.360458, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 3 22:06:49 2013] Not overwriting source region fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.reg [Fri May 3 22:06:49 2013] Extracting stamp from image fullrun_pn_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (461, 163) - (536, 238) [Fri May 3 22:06:49 2013] XMMSAS bgd. selection expression = annulus(43304.326416, 17421.360458, 1087.500000, 2175.000000, X, Y) && !ellipse(41577.132000, 20590.406000, 2095.648060, 655.286419, 238.697000, X, Y) && !ellipse(41682.142000, 20174.930000, 2184.536063, 2184.536063, 0.000000, X, Y) && !ellipse(42691.082000, 18332.490000, 2165.792062, 2165.792062, 0.000000, X, Y) && !ellipse(42949.314484, 17944.001648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43560.472000, 16883.456000, 1393.296040, 1393.296040, 0.000000, X, Y) && !ellipse(43973.640717, 16062.882858, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 3 22:06:49 2013] Writing fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35.gif [Fri May 3 22:06:52 2013] ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create [Fri May 3 22:06:52 2013] Mean detx,y = (-12218.39, -14305.85) [Fri May 3 22:06:52 2013] ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.img and ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create [Fri May 3 22:06:52 2013] ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.pi and ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create [Fri May 3 22:06:52 2013] Setting source spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.pi.gz [Fri May 3 22:06:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.pi.gz [Fri May 3 22:06:52 2013] ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create [Fri May 3 22:07:00 2013] Not generating rmf since there are only 96 counts [Fri May 3 22:07:00 2013] rmf not generated due to insufficient counts [Fri May 3 22:12:41 2013] Updating aperture counts using extracted products [Fri May 3 22:12:41 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_src.pi.gz = 380.00 [Fri May 3 22:12:42 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_bgd.pi.gz = 149.00 [Fri May 3 22:12:42 2013] Got source and background scale factors 1321632.000000, 975142.000000 [Fri May 3 22:12:42 2013] User source parameters: Position = (498.3, 200.8) = 12 42 15.17 -63 10 35.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 178.1 +/- 20.5 Background aperture counts = 201.9 Rate = 0.004 +/- 0.0005 [Fri May 3 22:12:42 2013] Updating counts from extracted products [Fri May 3 22:12:42 2013] Set source signif. to 178.06/14.21 = 12.53 [Fri May 3 22:12:43 2013] No arf file for this source, not re-computing flux [Fri May 3 22:12:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 22:12:53 2013] xmm0109480401/analysis//spectral/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete